• Descrizione e composizione del prodotto Il Tavolo LUXOR - Cod. Art. 1972/B - 1951 - 1942 è un Tavolo concepito per l’arredamento di interni, fabbricato in vetro float curvato. Il Tavolo LUXOR è stato prodotto negli stabilimenti di FIAM ITALIA SPA, siti in Via Ancona 1/B, 61010 Tavullia (PU), Italia - Tel: +39.0721.20051 - Fax: +39.0721.202432 - www.fiamitalia.it...
Non esporre il Tavolo LUXOR a fonti di calore intenso (quali ad esempio: stufe o forni), in quanto l’esposizione del prodotto a tali sollecitazioni può causare il danneggiamento del vetro float rendendolo meno resistente e, pertanto, meno sicuro.
è stato acquistato il prodotto al fine di ottenere le specifiche tecniche e di forma del Tavolo LUXOR stesso o della parte danneggiata, avendo cura di indicare il codice identificativo nonché...
• Product description and composition The LUXOR Table - Art. Code 1972/B - 1951 - 1942 is a Table intended as an item of indoor furniture. It is manufactured from curved float plate glass. The LUXOR Table was produced at the FIAM ITALIA SPA factory at Via Ancona 1/B, 61010 Tavullia (PU), Italy - Tel: +39.0721.20051 - Fax: +39.0721.202432 - www.fiamitalia.it...
Sharp items or anything which may damage the glass (such as chemical products containing hydrofluoric acid) should not be placed on the surface of the LUXOR Table. If objects of this kind are placed on the surface of the LUXOR Table in spite of this warning, you are urged to take adequate precautions to prevent damage to the float glass.
Some household and furniture cleaning products may damage the float glass from which the LUXOR Table is made. When cleaning the glass of the LUXOR Table, use a damp cloth or leather with washing up liquid or soft soap if necessary. Do not use powder detergents or detergents containing abrasives for cleaning the LUXOR Table, since they may scratch the float glass.
Extraire la base de la Table LUXOR de son emballage. Toujours opérer à deux (minimum). d) Extraire le dessus de la Table LUXOR de son emballage et le positionner sur la base. Toujours opérer à deux (minimum) et porter...
La distribution de poids, d’objets et de charges sur la surface du dessus de la Table LUXOR doit être homogène et équilibrée afin de garantir la stabilité et la sécurité. L'application ou la distribution non homogène ou non équilibrée de poids, d'objets et de charges sur la surface du dessus de la Table LUXOR peut en compromettre la stabilité...
La Table LUXOR doit faire l'objet d’un entretien afin de garantir un fonctionnement et une sécurité parfaits. Si la Table LUXOR ou une partie de la Table est ébréchée ou cassée, contacter le fabricant ou le point de vente où a été fait l’achat afin d’obtenir les spécifications techniques et de forme de la Table LUXOR ou de la partie endommagée, en indiquant le code...
Der Tisch LUXOR - Artikelcode 1972/B - 1951 - 1942 ist ein für die Inneneinrichtung bestimmter Tisch aus geformtem Floatglas. Der Tisch LUXOR wurde hergestellt in den Werken der Firma FIAM ITALIA SPA, Via Ancona 1/B, 61010 Tavullia (PU), Italien - Tel: +39.0721.20051 - Fax: +39.0721.202432 - www.fiamitalia.it...
Gegenstände (heißer als +30°C) (z. B. noch heiße Backwaren) auf den Tisch legen, da das Floatglas durch den Temperaturunterschied beschädigt und geschwächt werden kann. Den Tisch LUXOR nicht in unmittelbarer Nähe von Wärmequellen wie zum Beispiel Öfen, Heizkörpern, usw. aufstellen, da das Glas durch die Hitzeeinwirkung geschwächt werden kann.
Sollte der Tisch LUXOR oder auch nur ein Teil davon zerbrochen oder anderweitig beschädigt sein, setzen Sie sich bitte mit dem Hersteller oder dem Händler, bei dem Sie ihn gekauft haben, in Verbindung, um die technischen und die formrelevanten Spezifikationen des Tisches oder des beschädigten Teils zu erhalten, und vergessen Sie nicht, dazu den Identifikationscode und...
Seite 16
Fiam Italia S.p.A. Via Ancona, 1/b - 61010 Tavullia (PU) Tel.: +39.0721.20051 - Fax: +39.0721.202432 www.fiamitalia.it...