Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions Mixanto
: Note the flattened sides of the blade base and
Important
of the hole in the bottom of the container. The blade must
sit precisely in the hole of the container.
Program buttons
E
Various programs are available for processing (
see page 9).
description
•
Press on a red-lit program button to start the corre-
sponding program.
Only the actuated program button will then remain
lit, the lights on all the other program buttons will go
out.
•
Once the program has ended, processing stops auto-
matically.
All program buttons light red.
Standby mode.
•
You can cancel the running program at any time by
pressing the red-lit program button.
All program buttons light red.
Standby mode.
Rotary knob for speed setting
CAUTION Rotating parts can cause injury!
•
Processing starts immediately once the knob is turned
from position
0
!
•
Using the rotary knob, you can set the speed levels
and thereby start the appliance.
•
If you set the rotary knob to position
ing, processing will stop.
•
You can change the speed level at any time.
•
In addition, the rotary knob serves to pre-select the
speed for the
SLOW START
see page 9).
tion
PULSE button
G
•
Pressing the PULSE button switches the speed of the
blade temporarily to 20,000 rpm in order to better mix
or chop the ingredients.
•
The PULSE function can be selected in all programs.
•
Only ever hold the button for a brief period, approx. 3 to
4 seconds (if required, press briefly multiple times).
8
Subject to technical changes without notice; no responsibility is accepted for the accuracy of this information.
Program
F
0 - 5
during process-
0
program (
Program descrip-
Spatula
K
With the spatula you can push any pieces of food that are
driven up in the container or which stick to the container
wall back down again.
Important:
•
Only use the spatula when the container lid is in place.
Safety features
•
The appliance cannot be started without the container
being in position.
•
If the container is in position and the rotary knob for
the speed setting is not at
Remedy: Turn the rotary knob to
•
If it is not used, the appliance automatically switches
into energy-saving mode after approx. 10 minutes.
The lights go out on the program buttons.
Reactivate the appliance by pressing any button or by
activating the rotary knob.
First use
•
Ensure that the appliance's mains plug is plugged out.
•
Before using the appliance for the first time, thoroughly
clean all parts of the appliance (see section
•
Always ensure that the appliance is completely assem-
bled before operating it, with the container lid
in place
and the measuring cup
Alternatively, the spatula provided can also be inserted
in the container lid instead of the measuring cup.
•
Place the appliance on a non-slip, even and clean sur-
face.
Switching on and setting the appliance
CAUTION Rotating parts can cause injury!
•
Never put your hand into the appliance when the motor
is running.
CAUTION Risk of injury from the container wall
becoming hot, from hot splashing food-
stuffs and hot steam!
•
At cooking temperatures above 60 °C, foodstuffs that
spit or splash out, and any contact with the walls of the
container can lead to burns.
•
Do not exceed the maximum fill quantity of the con-
tainer. The maximum fill quantity is marked on the wall
of the container (2.0 litres/8 cups, marking
•
Make sure when removing the container that none of
the hot contents can escape.
NOTE
Running the appliance while empty can
cause damage!
Never operate the appliance when empty. This can damage
the blade mount and/or seal.
0
, the program buttons flash.
.
0
Cleaning
seal
and
in place and locked
).
MAX
).
!
Werbung
Inhaltsverzeichnis
