Operation; Cleaning; Recognising And Repairing Of Mistakes - 1A Profi Handels ZNAF1501 Bedienungsanleitung

4 English

4. OPERATION

Turn on the empty fryer before the first use for about 10 minutes. During this time there may be a slight odor and
smoke. This is normal and completely harmless.
4.1. Preparing for use:
Place the appliance on a stable, horizontal surface.
Make sure the power cord has enough length to the
socket, and appliance is with good air circulation and
away from hot surface, and any combustible materials.
4.4. Carefully pull the pan out of the Air fryer, and put it
on a stable surface.
4.6. Slide the pan back into the Air fryer, and make sure
the mash basket is well inserted into pan, and then hold
the whole part into the Air fryer.
IMPORTANT!
4.2. Put the mash basket into the pan, only when you hear
the sound signal "tang", then insert the pan into the Air fryer
chamber.
4.3. Preheating the appliance for 3 minutes before
Placing the ingredients in the basket.
4.5. Place the ingredients in the mash basket.
4.7. Turn the temperature control knob to the proper
temperature.
4.8. Determine the required preparation time for the
ingredient (see item 7). Then turn the timer knob to the
required preparation time,the power light is on, which
means power on.
4.10. Carefully pull out the pan,
and press the basket release
button and lift the basket out
of pan to remove the
ingredients.

5. CLEANING

l Please always do the cleaning when the Air fryer is cool down.
l Do not use strong corrosive cleaner to clean the appliance, in case of any damage to the Air fryer or people.
l Please select a soft clean cloth to wipe the air fryer. Do not use wet cloth to clean the air fryer, prevent water into
the fryer machine interior, cause a short-circuit; fires and electric shock risk events occur.
l Do not clean the pan, basket and the inside of the appliance by metal kitchen utensils or abrasive cleaning materi-
als , as it may damage the coating of them
l Clean the pan, separator and basket with normal water, some washing-up liquid and a non-abrasive sponge.

6. RECOGNISING AND REPAIRING Of MISTAkES

Problem Possible cause
The appliance is not plugged in
Pan is not well inserted
The Air fryer does
Manual reset temperature control
not work
disconnected
Indicating light not on
Motor does not work
Fan stuck, or the air inlet blocked
or makes noise
English 5
4.9. When you hear the timer bell, the set preparation
time has elapsed, and the ingredient would be ready.
4.11. Please be careful, and make sure to put the pan
or basket on a stable surface, to avoid any scalded may
caused. Always unplug the appliance after finishing
using, and wait till it is cool down.
Solution
Put the main plug in an earthed wall socket
Pull the pan out, and slide the pan back into the Air
fryer again
Click the "RESET" button on the bottom of
appliance to reset
If the motor and heating element work properly,
please consult for maintenance
Power off, and check if there is anything blocked, or
consult for maintenance