Installation; Positioning The Appliance - Panasonic NR-BD28AB1 Bedienungsanleitung

This section explains how to install your appliance for the most energy-effi cient,
safe and quiet operation.
Dimensions
W540 x D545 x H1775 (mm)
Unpacking your appliance
Remove all packaging and tape.

Positioning the appliance

Ventilation
When installing the appliance into a kitchen cabinet, make sure that the openings for heat releasing and ventilation are at
least 200 cm , which enables adequate cooling of the condenser.
2
When installing built-in appliances into a cupboard or cabinet in a side-by-side layout, the condensation prevention installation
kit should also be purchased and installed.
For safety reasons, the condensation prevention kit may only be installed by an authorized service technician!
Order code: 376078 (appliances higher than 1,700 mm)
Temperature
The room temperature affects the refrigerator's energy-effi ciency, i.e. how much electricity it uses to chill and freeze foods.
For the best results, install your refrigerator:
away from direct sunlight
●
away from radiators, cookers or other heat sources
●
where the room temperature corresponds to the climate classifi cation for which the appliance is designed. Refer to the
●
Specifi cations Section for your appliance's climate classifi cation.
Extreme temperatures or environmental conditions may have negative impact on its performance.
●
Stored food may spoil.
Refrigerator door
The refrigerator's door hinges can be swapped over, from the right side to the left, so that the doors open in the opposite
direction. If this is more convenient in your home, please contact our service centre listed on the attached sheet or access to
our Web site (http://www.panasonic.com).
We could not be held responsible if you replace the hinges by yourself.
All manuals and user guides at all-guides.com

Installation

Min 200 cm
2
Min 200 cm
2
5 5 5