Troubleshooting - TIPTEL easySET 50 Bedienungsanleitung

Troubleshooting

Problem
No dialling tone
available
My modem/set top
box/ fax is not
working
Short "hissing"
sound heard on
phone attached to
the Extension unit
when first picked
up
The extra extension
unit is blinking
before starting a
registration
procedure
Guarantee
Please contact your local dealer or importer for details of guarantee for non EC
countries.
Within the European Community the following guarantee regulation applies:
Your contact for services arising from guarantee obligations is the authorised
dealer where you bought the device.
English
Possible cause
– Base unit power not on
– Cables not correctly con-
nected
– The Extension unit may not
be registered to the base
– The Extension unit is out of
reach
The Extension unit switch has
not been set to modem
functionality
The Extension unit switch has
not been set properly
The extra extension unit is
already registred to another
phone jack
Solution
– Check all power and cable connec-
tions. If in doubt please refer to the
user manual. Check that the Extension
unit swich is correctly set to either S
or C – Relocate the Extension unit
within signal reach of the Base unit
(max 50m)
Make sure that the Extension unit
switch is set to C
Make sure that the Extension unit
switch is set to S
Turn power on-off, 5 times in a row
until the light is continuosly red.
Hereafter continue extra extension unit
installation
14