Product Setup - D-Link DIR-842 Installationsanleitung

PRODUCT SETUP

WEB-BASED SETUP
PC
Router
Modem
Modem
Router
12V 1A POWER
4 3 2 1 INTERNET RESET
PC
Modem
Router
12V 1A POWER
4 3 2 1 INTERNET RESET
Admin Password:
Log In
4
Step 1
Position your DIR-842 near your Internet-connected modem and
PC. Keep the router in an open area for better wireless coverage.
Step 2
Unplug the modem Ethernet cable connected to your computer and
plug it into the port labeled 'INTERNET' on the router.
Connect the supplied power adapter to the router and a power
outlet, then verify that the power LED is on.
Step 3
Plug one end of the supplied Ethernet cable into the port labeled '1'
on the back of the router, and the other end into the Ethernet port on
your computer.
To set up the DIR-842 through Wi-Fi, go to your computer or mobile
device's Wi-Fi settings and select the network (e.g. dlink-A8FA). Enter
Wi-Fi password (e.g. akbdj19368) on the included Wi-Fi Configuration
Note.
Step 4
Open a browser on the connected computer. If you are not
automatically directed to the D-Link Setup Wizard, go to
http://dlinkrouter.local./ and follow the onscreen instructions to
configure your DIR-842. Use Admin as your username and leave
the password blank.
DIR-842