Samsung PS-50C6970 Bedienungsanleitung Seite 16

Basic Features
– Go to Stored Position: Rotates the antenna to the
stored satellite position.
– Antenna Position: Adjusts and stores the antenna
position for the selected satellite.
– Store Current Position: Stores current position as
the selected positioner limit.
– Signal Quality: Display the current status of
broadcasting signal.
Installer Mode: Sets limits to the scope of movement
of satellite antenna or reset the position. Generally,
installation guide uses this function.
– Limit Position (East / West): Selects the direction of
the positioner Limit.
– Antenna Position: Adjusts and stores the antenna
position for the selected satellite.
– Store Current Position: Stores the current position
as the selected positioner Limit.
– Go to Zero: Moves the antenna to the reference
position.
– Reset Positioner Limit: Allows the antenna to rotate
over the full arc.
■ Reset All Setting (OK / Cancel): All satellite settings will
be reset to the initial values.
¦ Editing Channels
Channel Manager Option Menu
(in Channel Manager)
1. Select a channel and press the
2. Edit the channel name or number using the
Edit Channel Name or Edit Channel Number menu.
■ Edit Channel Name (analogue channels only): Assign
your own channel name.
■ Edit Channel Number (digital channels only): Edit the
number by pressing the number buttons desired.
¦ Other Features
Cable Search Option
(depending on the country)
Sets additional search options such as the frequency and
symbol rate for a cable network search.
■ Freq.Start / Freq.Stop: Set the start or stop frequency
(differs in each country)
■ Symbol Rate: Displays available symbol rates.
■ Modulation: Displays available modulation values.
16
English
[6970_GER]BN68-02807Q-00L04.indb 16
Channel Manager
Channel Manager Option Menu
Set each channel using the Channel Manager menu options
(Lock / Unlock, Timer Viewing, Timer Recording, Sort,
Reorder, Delete, Select All / Deselect All). Option menu
items may differ depending on the channel status.
1. Select a channel and press the
2. Select a function and change its settings.
■ Lock / Unlock: Lock a channel so that the channel
■ Timer Viewing: You can set a desired channel to be
■ Timer Recording (digital channels only): Allows you to
TOOLS button.
■ Sort (analogue channels only): This operation allows
■ Reorder (when the Antenna was set to Satellite):
■ Delete: You can delete a channel to display the channels
■ Select All / Deselect All: Select all the channels
cannot be selected and viewed.
✎
NOTE
x
This function is available only when the
Child Lock is set to On.
x
The PIN input screen appears. Enter your
4-digit PIN, the default of which is "0-0-0-0".
Change the PIN using the Change PIN option.
displayed automatically at the reserved time. Set the
current time irst to use this function.
✎
When a digital channel is selected in
Channel Manager, press the ► button to view
the digital Programme.
record a programme currently being broadcasted or
make a reservation to record a programme scheduled
for broadcast.
✎
A USB device with 4GB of memory or greater
must be connected to the TV.
✎
A USB storage device cannot record until it
completes the Device Performance Test.
✎
In case of USB-HDD, over 5400rpm
✎
In case of USB Stick, USB 2.0 and SLC Type.
(Minimum size of USB Stick is 2GB.)
✎
To record, press the � (REC) button on the
remote. Press � (REC) twice to set the recording
duration.
you to change the programme numbers of the stored
channels. This operation may be necessary after using
the auto store.
Rearrange the channel manager in numerical order.
you want.
or deselect all the selected channels in the channel
manager.
TOOLS button.
2010-05-18 오전 11:16:01