Herunterladen Inhalt Inhalt Diese Seite drucken

RCS AUDIO-SYSTEMS TP-200 IR Bedienungsanleitung Seite 12

Rds/dab/internet radio
Inhaltsverzeichnis

Werbung

To stop broadcasting during alarm broadcasting,
press "Alarm" key to stop the alarm broadcasting
and return to the previous status.
If you press the ALARM button in standby mode,
you can select and deselect the „alarm" trans-
mission. Press the ALARM button repeatedly to
change the status as described below. The chan-
ged information is shown on the LCD.
[Off --> "Alarm1" --> "Alarm2" --> "Alarm1",
"Alarm2"
(all selected)]
19. PRESET
It can be saved and loaded 10 preset stations
each mode for Internet radio, DAB radio, and
FM-radio.
Save
To save the current playing audio source as a
preset, press P.SET button (approximately 2 se-
conds), displayed
[Save to
the top of LCD, and the memory locations 1–10
are displayed below.
Select the desired memory location with the
CONTROL / SELECT wheel and press to save
to that location. If no action is taken for about
15 seconds, the menu returns to the previous
operation.
Load
To load the list stored in the P.SET bank, press
P.SET (approximately 0.2 seconds) on the front
control panel, and message
will be displayed at the top of LCD. Below this,
the memory locations 1-10 are displayed.
Select a station with the CONTROL / SELECT
wheel and press to play the selected station.
During playback, the preset memory number (P1,
P2, etc.) is shown at the bottom of the display.
12
Off
Daily
Once
Weekends
Weekdays
1
1. OST chateu TOP 20
2. [ Not set ]
3. [ Not set ]
4. [ Not set ]
5. [ Not set ]
1. OST chateu TOP 20
2. Dreamcast
Preset] message at
3. GFN FM 98.7
4. BBC Radio 4
5. [ Not set ]
Internet radio
BBC Radio 4
[Recall from
Preset]
SYSTEM SETTINGS
Um die Übertragung während der Alarmüber-
Alarm1 frequency
tragung zu beenden und zum vorherigen Status
zurückzukehren, drücken Sie die Taste ALARM.
Wenn Sie die ALARM-Taste im Standby-Modus
drücken, können Sie die „Alarm"-Übertragung
26/03/2022
aus- und abwählen. Drücken Sie wiederholt die
2:07 PM
Taste ALARM, um den Status wie unten be-
schrieben zu ändern. Die geänderten Informatio-
nen werden auf dem Display angezeigt.
12:00 AM
[Off --> "Alarm1" --> "Alarm2" --> "Alarm1",
"Alarm2"
19. VOREINSTELLUNG
Save to Preset
Es können 10 voreingestellte Sender pro Modus
für Internetradio, DAB-Radio und FM-Radio ge-
speichert werden.
Speichern
Um die aktuell wiedergegebene Audioquelle als
Recall from Preset
Voreinstellung zu speichern, drücken Sie die Ta-
ste P.SET (ca. 2 Sekunden). Die Meldung
to
Speicherplätze 1–10 werden darunter angezeigt.
Wählen Sie mit dem CONTROL / SELECT Wahl-
11:18 AM
rad einen Speicherplatz aus und drücken Sie um
auf diese Position zu speichern. Wenn etwa 15
Sekunden lang keine Aktion durchgeführt wird,
P4
kehrt das Menü zum vorherigen Vorgang zurück.
Laden
Um die im P.SET gespeicherte Liste zu laden,
drücken Sie die Taste P.SET (ca. 0,2 Sekunden).
Die Meldung
Display eingeblendet. Darunter werden die auf
Speicherplätze 1–10 angezeigt.
Wählen Sie mit dem CONTROL / SELECT Wahl-
rad einen Sender aus und drücken Sie, um den
gewählten Sender abzuspielen. Während der
Wiedergabe wird die Nummer des Voreinstel-
lungsspeichers (P1, P2 usw.) unten im Display
angezeigt.
TP-200 IR
(alle aktiviert)]
Preset] wird auf dem Display angezeigt, die
[Recall from
Preset] wird auf dem
[Save

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis