Maintenance; Power On/Off - KPS DCM4010FLEX Benutzerhandbuch

DCM4010FLEX
Symbols as marked on the meter and Instruction card
See instruction manual
!
Do not apply to or remove from HAZARDOUS LIVE conductors.
Equipment protected by double or reinforced insulation
Battery
Earth
Conforms to EU directives
Do not discard this product or throw away
~
AC measurement
Auto Power off Function
The meter automatically turns the power off after powering up and no
operation for 20 minutes ± 30 seconds.

Maintenance

Do not attempt to repair this Clamp Meter.
It contains no user-serviceable parts.
Repair or servicing should only be performed by qualified personnel.
Cleaning
Periodically wipe the case with a dry cloth and detergent.
Do not use abrasives or solvents.

Power on/off

Disable Auto Power off Function
Press "Power" button, and during the LCD
shows battery capacity, press "backlight"
button until the LCD shows "AoFF" to disable
Auto Power Off Function.
02
EN