Pfisterer IXOSIL HS-Endverschlussständer Montageanleitung Seite 34

Assembly
VII
Drawing not to scale – Only for Information
14 www.pfisterer.com
7 Assembly
Fix the castors to the longitudinal members with the M10x30 screws with
1 1
washers and nuts.
Fix the longitudinal members with pre-assembled castors to the foot sec-
2 1
tion using the M12x25 screws with washers.
Observe the markings on the foot section and longitudinal
members.
Fix the middle section on the foot section using the M12x40 screws with
3 1
washers and nuts.
IXOSIL HV Cable Termination Support / No. 880 283 966 (2022-04-08) Index 01