Herunterladen Inhalt Inhalt Diese Seite drucken

JL Audio MediaMaster I05 Bedienungsanleitung Seite 5

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 26
SYSTEM MENU SETTINGS
• Long press to access the System Settings: Main Menu
• Rotate to navigate
• Press to make selections
Setting
Create a custom name to display on connected Bluetooth devices
Name this Device
and NMEA 2000® networks
Audio Zone Setup
Configures each set of audio zone outputs
AUX Input
Configures AUX input sensitivity: 2V or 1V RMS (default)
Sensitivity
Diagnostic
Displays serial number, hardware and software version info
Display
Configures display and brightness settings
Built-in alert notifies when
Low Voltage Alert
+12VDC supply voltage drops
below 10 volts
Scrolling Text
Enables continuous scrolling of available RDS/track text info
Configures AM/FM tuner range/scale for a specific region;
Tuner Region
DAB+ replaces SiriusXM outside of North America
Power-up Settings
Configures display activation upon connection to power
Function
If triggered, the unit will enter Safe
Mode with a message to turn the
unit off until normal operating
voltage is restored.
8
AUDIO ZONE MENU SETTINGS
• Long press to access the System Settings: Main Menu
• Rotate to navigate
• Press to make selections
Zone
Function
Relative: Links the volume levels of
Zones 2 - 4 with the level of Zone
1. (Linked zones will proportion-
ally follow Zone 1's volume.) Each
zone's offset level is independently
adjustable, allowing you to create
a customized level controller,
specific to a vessel's layout.
Level Control Mode
Absolute: Creates an independent
level control for selected zones,
each with its own separate volume
level slider.
Z1: Zone 1
Fixed
Z2: Zone 2
Z3: Zone 3
Off
Z4: Zone 4
Bow, Bridge, Cabin, Cockpit,
Galley, Helm, Stateroom 1,
Stateroom 2, Tower, Transom
Rename Zone
Custom Name
Factory Default
Max Volume Limit
Max Vol Limit
Sub 1
LPF ( Low Pass Filter)
Sub 2
Sub 3
Sub 4
Sub Off
Z2: Zone 2
Same as Zone 1
Z3: Zone 3
Tone Control Mode
Independent Tone Control
Z4: Zone 4
Setting 1
Setting 2
4V RMS Max (default)
2V RMS Max
1V RMS Max
Alphanumeric Input
Off (default)
60 Hz
80 Hz
100 Hz
9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis