fontastic Anca Bedienungsanleitung Seite 3

GB
ANC Noise Cancellation
Anca is equipped with active noise cancellation to reduce
ambient noise and enhance music enjoyment. To activate the
ANC function, turn it on with the ANC switch. Activated ANC is
indicated by the green LED lighting up.
Music playback
Start music playback on the Bluetooth
with the Anca. The music is transferred to the Anca.
Stop the music playback on the Bluetooth
the streaming.
To start or stop music playback via the Anca, press the
multifunction button (5) once. During music playback, the LED
blinks blue.
By using an 3.5 mm jack cable, you can also use Anca as wired
headphones when it is turned off. To do this, connect the cable
to the 3.5 mm line-in port (7) of Anca and the audio source, start
music playback on the audio source.
NOTE: The buttons on the Anca have no function when
using an audio cable.
Music control
To play or stop music, briefly press the multifunction key (5).
To skip to the previous title, press and hold the volume- key (6).
To skip to the next track, press and hold the Volume+ key (4).
Note: The mobile phone must support the A2DP and AVRCP
profile for music streaming and control. The buttons have no
function when using the wired connection. Use the audio source
to control the music and volume.
Hands-free features
With its built-in microphone and intelligent noise reduction,
the Anca is perfectly suitable for phone calls.
Answer/ending calls
To accept an incoming call, briefly press multifunction button (5).
To end an ongoing call, press and hold the multifunction button
(5).
Redial
Press the multifunction button (5) twice to redial the last dialled
number.
3
source which is paired
®
source to interrupt
®
Volume setting
To increase the volume, briefly press the Volume+ key (4).
Press repeatedly until the desired volume is reached.
To reduce the volume, briefly press the Volume- key (6). Press
repeatedly until the desired volume is reached.
Technical data:
• BT version 5.3
• Frequency: 2.402 -2.480GHZ
• Range: approx. 10m
• Profiles: Headset, Handsfree, A2DP, AVRCP
• Charging voltage: 5V DC
• Speaker diameter: 40mm
• Frequency range: 20Hz-20kHz
• Sensitivity: 115dB
• Impedance: 32 Ohm
• Noise reduction depth: 22dB
• Noise reduction bandwidth: 50-800kHz
• Microphone sensitivity: 40-42dB
• 3.5 mm audio line-in connector
• Status LED: Blue/Red/Green
• Micro USB charging port
• Battery capacity: 400mAh
• Operating time: Up to 10 hrs.
• Operating temperature: -20ºC to 60ºC
• Weight: 197g
Safety advice:
• Do not open the device
• Do not hold the device under water
• Keep it safe from humidity
• Do not connect the adapter to the device by using force
• Keep the device away from children
• Disconnect electronic devices from the power when not using
them for longer time.
• Do not use the device when it has visible defects.
No liability is accepted for any damage caused by incorrect
operation.
In case you need technical support, please contact our
support-team by e-mail under service@fontastic.eu.
GB
4