KLIM BLAZE PRO Kurzanleitung Seite 5

ENGLISH
FIRST TIME USE & CONNECTION MODES
Wireless mode: Connect the USB receiver to your PC or to the
USB port on the charging base. Move the switch under the mouse
to the ON position.
Wired mode: connect the mouse to your PC via the USB cable.
Charging the battery
With the supplied USB cable: charging speed will depend on
power output of the port you connect it to. For quicker charges,
we recommed using a dedicated fast charger.
With the charging station: place the charging station on your
desktop and connect it to your computer via the supplied USB
cable. Place the mouse on top of the charging station until the
two pieces snap together in order to charge the mouse.
Note: You may use the USB port to connect a phone for
charging.
Regardless of the charging method, the logo on the mouse
indicates the battery status:
- Low battery: logo turns red and blinks.
- Charging: logo turns yellow and blinks.
- Charge complete: logo turns green.
RGB backlighting & advanced customization
Use the switch located under the mouse to turn the RGB rim on or
off. Press the button under the charging base to turn its lights on
or off. To access advanced customization options such as mouse
key remapping, macros and multiple RGB effects and colors,
download our dedicated drivers at www.klimtechs.com/drivers
Contact & troubleshooting
Do you need additional assistance with your product? Contact us
at support@klimetchnologies.com. Our team of specialists is at
your disposal and will always reply within 24 hours!
3