SAKOBS SB2122 Bedienungsanleitung Seite 11

Connect to OPTICAL Socket
-
Remove the protective cap of the OPTICAL
socket, then connect an OPTICAL cable
(included) to the TV's OPTICAL OUT socket
and the OPTICAL socket on the unit.
EN
Source
Press the
2
control repeatly to select the OPT
mode, the indicator light up green.
3 Some TVs are not that smart and need to select the Audio Source or set the Audio format rst, otherwise
there will be no sound.Below are some general settings, if it is different from your TV,please refer to
your TV manual to enable the OPT operation.
button on sound bar /remote
①
Menu
Sakobs SB2122/External Device/Auto/OPT/Toslink
②
Menu
Digital audio output format
A
Sound Audio Output
Expert setting
PCM
11
AUX IN OPTISCH
OPTICAL
Note: Make sure to remove the protective
covers on the ends of the cable.
Incorrect insertion will damage the port
and/or the connector.
OPTICAL OUT
OPT
B
EN