Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Thank you for buying a HIGHSIDER product. Because of our passion for motorcycles all our products are designed to meet your needs as a motorcyclist. We wish you always a safe and pleasant ride with your new HIGHSIDER product
from Paaschburg & Wunderlich GmbH.
Only when professionally installed is the statutory warranty and driving safety fulfilled. Pay attention to the information in the operating instructions of the vehicle or specifications of the vehicle manufacturer. Ask a specialist or mechanic
to do the installation if you are unsure yourself! Failure to follow the assembly instructions can damage your vehicle and void the warranty. This is necessary to not affect the riding safety. No liability is accepted for consequential
damage. The unauthorized reworking and / or modification of the product can lead to the failure of the function and is not permitted. Never look directly into the light of the LED's! This light module is approved for use on motorcycles.
The product complies with the current ECE standard when installed correctly. This means no registration or carriage of documentation is needed when installing it onto your motorcycle.
Please keep these instructions for later use! The module may only be installed at the rear of the vehicle. A maximum of 2 rear lights may be operated on the vehicle!
Scope of delivery:
1 pc. taillight
Installation of the taillight:
1. Disconnect the battery from the electric system and assure that your motorcycle stands solidly on the ground. Before installation a functional test of the modules is recommended.
2.
CAUTION:
Connect to 12 V DC power only! Disregarding this will terminate the guarantee.
3. Always install pairs of taillight on the rear. Make sure no accessories like bags etc. affect the light distribution of the taillight. Pay attention to a good heat dissipation. Do not mount it near inflammable areas, eg. Tank, fuel line, etc.
4. Make sure to to install the modul in a horizontal orientation to the ground, so that the lights meets the ECE requirements concerning light distribution.
5. A maximum of 2 taillights may be installed on the motorcycle!
6. All cables must be laid out carefully and in a professional manner. Prevent sharp bending of cables. Open cable ends must be insulated. We recommend to protect the cables with a protection tube.
7. Due to the reduced electrical resistance of the LED module, vehicles equipped with CAN-bus system or in some cases ABS system, may need the installation of an additional resistor (in parallel) to work properly.
8.
CAUTION:
After installation, the proper function of the ABS system / CAN-bus system must be checked!
9.
CAUTION:
Check the complete light installation of your vehicle before each ride!
Cable connection (connect to 12V DC only)
Black cable = ground (-)
White cable = rear light (+)
Red cable = brake light (+)
Before each ride: It is the duty and responsibility of the rider to regularly check and maintain the safety-related vehicle parts. Before starting your journey, check the correct adjustment and function of the products and the tightness of all screwed connections.
Warranty: Take the time to do a 100% professional job of installing the products. Take into account all our installation and safety instructions.
A faulty, improper installation or handling of the product will void the warranty.
Maintenance/Care: Do not use aggressive detergents to care for the products. The products can be perfectly cleaned with a simple, lukewarm detergent solution. Contact with brake fluid, brake cleaner, fuel, etc. should be avoided. Immediately pick up any unintentionally
applied impurities with a soft cloth and clean the surface with detergent solution
Enviromental Information: This product may not be disposed in the normal household rubbish at the end of its lifetime. The disposal can be done through the Paaschburg u. Wunderlich customer service or a local return and waste collection institution.
HIGHSIDER Tips & Tricks on
https://www.youtube.com/c/HIGHSIDERTippsTricks
Exclusion of liability and warranty regulation:
In the event of improper handling, installation or use of the device, warranty and guarantee claims may expire. Due to the non-verifiability of the correct application, Paaschburg und Wunderlich GmbH assumes no liability for direct or indirect damage or consequential damage resulting from the operation of the device.
This does not apply if the damage is based on intent or gross negligence on the part of Paaschburg & Wunderlich GmbH, or if the damage consists in injury to life, limb or health, or Paaschburg & Wunderlich GmbH has culpably violated an essential contractual obligation (cardinal obligation).
Paaschburg & Wunderlich GmbH, Am Alten Lokschuppen 10a, D-21509 Glinde (GER),
Tel.: +49 (0) 40 248 277-0; E-Mail:
sales@pwonline.de
255-279A_Rev00_2021-10
Please read this manual carefully prior to installation
Find useful additional accessories like stem extensions, resistors, electronic relays, adapter cables and other equipment in our Webshop!
:
and safety instructions
Mounting
HIGHSIDER LED taillight AKRON-X
You can find more
products at:
www.highsider-germany.de
A: 39 mm
A
www.highsider-germany.de
All rights reserved. Changes and errors are excepted.
Seite 3 von 5
Werbung
