eKids 554-Serie Erste Schritte

This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE).
This means that this product must be handled pursuant to European Directive 2012/19/EU in order to be recycled or dismantled to minimize its impact
on the environment.
For further information, please contact your local or regional authorities.
Electronic products not included in the selective sorting process are potentially dangerous for the environment and human health due to the presence
of hazardous substances.
CHARGE BEFORE USE
Getting Started
There are two ways to listen to music with this unit:
• In USB Mode you can connect a flash drive to the unit and listen to your stored songs.
• In Bluetooth Mode you can stream music from your smartphone or other Bluetooth device.
Note: When using USB Mode, this unit is compatible with .mp3 and .wav files ONLY.
This unit ships in Demo Mode for in-store demonstration purposes. Slide the ON/OFF/DEMO Switch to ON to exit Demo Mode.
Charging The Unit
1. Connect the included micro USB cord to the micro USB charging port
on the back of the unit.
2. Connect the standard USB plug end of the cord to a power USB port
on a computer or other USB charging device.
For first time use, charge unit for about 5 hours.
3. A low battery tone will sound to indicate it is time to charge the unit.
FRONT OF UNIT
Echo ON/OFF
Indicator
Power Reverse
ON/OFF
Mic
Volume
Echo ON/OFF
Bluetooth Pairing
EZ LINK SUPPORT
For additional information about the EZ Link feature and app, please scan the QR
code to match your product:
Disney Princess
Using USB Mode
Make sure the Mode Switch is set to USB.
• When the unit is OFF, connect a USB flash drive to the USB port
on the front of the unit.
• Press the Power Button to turn the unit ON.
• Press Play, then use the "Forward" and "Reverse" buttons to
advance through the numbers of files on the USB drive.
• After pressing "Play", the automatic play-all function will activate,
and songs will play in the order they were stored.
Using Bluetooth Mode
• Select the "Bluetooth" position on the Mode Switch. Turn on your
Bluetooth device and enable Bluetooth mode (check in Options or
Settings). The unit will automatically enter pairing mode.
• Using your Bluetooth device, select the Bluetooth pairing name for
your product:
- For Disney Princess: "EZ-Link 554DP"
- For Encanto: "EZ-Link 554EN"
- For Frozen: "EZ-Link 554FR"
• A tone will sound to confirm once your device is paired. Put your
Bluetooth device in play mode to play audio.
• Use the "Forward" "Reverse" and "Play/Pause" buttons on the unit
to navigate tracks.
• To manually pair your device, press and hold the Echo/Bluetooth
Pairing Button on the front of the unit.
Converting Files to MP3
iTunes music files are saved by default in .m4a format, and must be
converted to .mp3 format to play on the unit in MP3 mode. Check the
Help section in iTunes (or other music software program) to learn how
to convert to .mp3 format.
Recording Audio
• Record audio from Bluetooth mode and the microphone input, and
the file will save to your USB flash drive.
• Make sure the Mode Switch is in "Bluetooth" position, and that a
flash drive is connected to the USB port.
• When BT audio is playing, press the Record Button to start
recording audio. Press again to pause recording, and press Stop to
stop recording.
• Switch to USB Mode and select the saved file to listen to your
recording!
Installing EZ Link Setup App
Use the EZ Link Setup app to access your favorite Disney playlists
on a variety of different music streaming services. This function will
need to be activated before use. To set up the app:
• Download the free EZ Link Setup app from the Apple Store or
Google Play, and install it on your Bluetooth-enabled iOS or
Android device.
• Slide the Mode Switch on the karaoke unit to Bluetooth Mode.
• Make sure your Bluetooth device is powered on and connected to
the karaoke unit.
• Follow the prompts in the EZ Link Setup app to choose a preferred
music streaming service, and complete setup.
• Keep the EZ Link Setup app open and running on your Bluetooth
enabled device to use the EZ Link feature seamlessly.
Di554-ONLINEIB-ENG-062821-A
Model: 554 Series
Bluetooth Karaoke with EZ Link
EZ Link Button
Recording Indicator
- Recording = LED solid on
- Pause recording = LED flashing
- Stop recording = LED off
Forward
Speaker
Light Show
Volume
Play/Pause Recording Stop
Encanto
(In BT Mode Only)
For further information and to see the latest instructions, visit www.ekids.com
Charge via USB AC adaptor, computer USB port, or other powered USB port
USB Port
Record
ON/OFF/Pause
Frozen
Once the app is enabled, use the EZ Link Button on the front of
the karaoke unit to access Disney playlists:
• Press the EZ Link Button once to connect to your selected
streaming service, and enjoy a custom Disney playlist themed to
your product.
• Press and hold the EZ Link Button to connect to the Disney Hits
playlists, and enjoy even more great music!
Note: Product must be in Bluetooth Mode and paired to an iOS or
Android device that is running the EZ Link Setup app. It may take a
few seconds to connect to your streaming service and playlist. Some
streaming services require you to press 'Play' on your Blueooth
device. No user information is gathered when using the app.
If the unit does not respond:
• Make sure unit is completely charged.
• To re-pair your device, press the Bluetooth Pairing Button on the
front of the unit.
Note: The rechargeable battery can be replaced only by eKids
Consumer Repair Department.
App Troubleshooting:
If you press the EZ Link Button, but a playlist does not open:
- Confirm your Bluetooth device is connected to the unit.
- Make sure the EZ Link Setup app is installed and running on your
'unlocked' Bluetooth device.
- Make sure the EZ Link Button is enabled (via EZ Link Setup app).
WARNING/DISPOSAL OF UNIT
Please do NOT attempt to change the battery yourself. Doing so may
damage the unit and will void your warranty.
• Never dispose of used batteries/electronics with ordinary solid wastes,
since they contain toxic substances.
• Always dispose of used batteries/electronics in accordance with the
prevailing community regulations. Many electronics retailers now
recycle batteries and other electronic components at no charge.
To find a drop-off location near you, visit www.call2recycle.com
Internal Rechargeable Lithium-ion Battery
This device uses an internal rechargeable lithium-ion battery that should
last the lifetime of the device. If you suspect your battery may be dead,
try charging it several times. If problems persist, please do not attempt
to repair unit; see warranty for factory service.
CAUTION
The battery used in this device may present a risk of fire, explosion or
chemical burn if mistreated. Never use or charge the battery if it appears
to be leaking, discolored, deformed, or in any way abnormal. Never
disassemble the unit or attempt to remove battery as that could cause
leakage of alkaline solution or other electrolytic substance. Always
confirm that the temperature is 5°C – 35° C (41° - 95° Fahrenheit)
before you charge the battery. Leakage or deterioration of the battery
may occur if this warning is not heeded.
• Never expose the battery to any liquid.
• Never expose the battery to excessive heat such as direct sunlight
or fire. Never use the battery pack in an unventilated vehicle where
excessive internal temperatures may be encountered.
• Always keep the battery out of the reach of infants and small children.
• It is important to keep the unit as dry and clean as possible. You may
clean the cabinet with a cloth or sponge moistened with mild soap
and water. Do not attempt to use strong cleansers or solvents, as
they may cause damage.
• Battery chargers used with the toy are to be regularly examined for
damage to the cord, plug, enclosure and other parts, and in the event
of such damage, they must not be used until the damage has been
repaired.
USB Adaptor
(not included)
OR
Computer connected
to working outlet
Computer USB port
BACK OF UNIT
Charging Indicator
- Charging = Solid Red LED
- Fully Charged = Solid Blue LED
Mode Switch
USB
(USB/Bluetooth)
Charging Port
USING A USB DRIVE
For best performance, use a high speed 3.1 USB drive
(not included) when recording audio from this unit.
Note: Using a lower speed USB drive may cause skipping
or poor performance of the Bluetooth audio stream.
Sometimes skipping in recorded music may occur,
depending on the online streaming speed of your phone.
MICROPHONE INPUT
USING THE MICROPHONE
• Connect the microphone to Mic Jack 1 or 2 on the
front of the unit.
• Slide the Microphone Switch ON to amplify your
voice when you sing.
• Control microphone volume using the Mic Volume
Buttons on the front of the unit.
Using EZ Link Button
Troubleshooting
Maintenance
ENG
ON/OFF/DEMO
Switch