Tesla SMART COMPOSITION SCALE WI-FI STYLE Benutzerhandbuch Seite 6

Multi-user on same phone:
1, Click at scale main page, enter into "Add new users" to set up the sub-user profi-
le, and " save" .then follow step 6.2 take measurements.
Main user page
Add new users
user profile & save
2, The Body values data will be automatically assigned to each user based on simi-
lar weight selection if step 6.1 setting Automatic distribution to ON.
Note: The speed of values transferred are based on the strength of the WI-FI signal.
And if have not find values in main page, be attention of middle " You need to claim
data" - View - Distribution
Allow other phones can connect my smart scale:
1,Click at scale main page, enter into Details of device page.
Choose " Share Device" - Fill in the phone no. of family member you want to invite
in, will be an notification to the number host.
Note: if the invited user has an account already, the Smart Scale device will auto be
showed in her/ his phone. Then able to use the scale with app.
If the invited user has not registered an account already, should be finish register
first.
Main user page
Share device page
Add family member
Important : support one main host of smart scale only . Other sub-user only
can be invited by shared device (different iphone) or add users ( same phone).
Cannot directly pair the scale with 2nd phone by add device step 3&4 & 5,
otherwise the initial host of smart scale will lost connection.
Device Manage
1.If you want to pair another device, delete the current connected device first by
click enter into details of device page, and select "Remove Device".
2.If the router has been changed, repeat steps of add device step 1 to 5.
Trouble shooting
1.When the LCD screen displays „LO", you should install a new battery.
2.When the LCD displays „ERR" and stays at "ERR"
• it indicates that the maximum weight has been exceeded.
3.When the LCD displays Weight but no analyze data in app or displays"ERR2"
• make sure you are barefoot when standing on the platform
• make sure your foot is touching the electrodes on the right and left side
• make sure you enter your profile parameters is full
• make sure your WELCOME HOME page shows the scale is connected
6