Device Overview; Ex-Relevant Safety Regulations - i.safe MOBILE IS-TC1A.1 Bedienungsanleitung

DEVICE OVERVIEW

1
1
HOLDER: Holder for IS530.1.
2
PLUG: Connecting IS530.1.
3
MAGNETIC CHARGER PORT: Connection for the i.safe PROTECTOR 3.0 Magnetic
Charger Cable (included in the IS530.1 package) for charging the IS530.1.
4
CAMERA: Recording temperatures.
SAFETY
Read the "Safety" section of this Operating Manual carefully before using the device. If you
do not follow these instructions or do not understand them, this could lead to death, severe
injuries and damage to the device.
USER
Only trained users who are qualified in the use of Ex devices in explosion hazardous areas and
who have read and understood this Operating Manual may use this device.

EX-RELEVANT SAFETY REGULATIONS

Use of this device assumes that the operator observes the conventional safety regulations and
has read and understood Operating Manual, Safety Instructions and certificate. When used in
explosion hazardous areas, the following Safety Instructions must also be complied with:
To ensure the IP-protection, it has to be ensured that all gaskets are present
and functional. There must be no large gap between the two halves of the housing.
The device must be securely fastened to the ISM interface when used in ex-hazardous areas.
The device may not be exposed to any aggressive acids or alkalis.
The device may only be used in zones 1, 2, 21, or 22.
Only accessories approved by i.safe MOBILE GmbH may be used.
3
2
4
EN 5