Herunterladen Diese Seite drucken

Waldmann CHEKOV Gebrauchsanweisung Seite 12

Tischsensor

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Transfer the data via NFC to the sensor. The NFC transponder is located under the sticker
showing a QR code on the white cover. The position of mobile device NFC can vary depending
on model.
The device confirms a successful transmission with three times green blinking. In case of an
3
error, the status-LED will blink 3 times red. In such case, please retry transmitting the data.
Subsequently the device connects to the Wi-Fi as configured and the status-LED will pulsate in
blue.
Afterwards the device logs into the MQTT server as configured and the status-LED will pulsate
in cyan.
After successful connection, the device switches to normal operation and the status-LED starts
showing the default colour green (might be different for specific installations).
In normal operation the status-LED and the reaction to the user push buttons are under control
of the cloud application.
Initial commissioning BlueRange
After power-up the status-LED will show pulsating purple.
As no configuration data is present, the device automatically switches to the configuration
3
mode. The status-LED will blink three times.
While the device prepares for configuration, the status-LED will pulsate orange. Please hold on.
When the device is ready for receiving its configuration data, the status-LED will show static
orange.
On your mobile device, please go to the LVE App (or BlueRange Admin App) and login.
Select the Bluerange network where you want to add the new devices.
Use „+" and selct either „Search for devices in range" (BT-Nearby) or „scan QR-Code".
Wait until the device is found and add it to the enrolement list. You might add multiple devices
to this list.
When done, start enrollment for the whole list.
After successful enrollment the device restarts and the status-LED is pulsating purple.
Afterwards the device connects to the MQTT cloud service via the BlueRange mesh network.
During this time the status-LED first pulsates blue and then cyan.
Seite/Page 12 / 14 / SAP-Dokument-Nr.: 10000155789 / 03.02.2022

Werbung

loading

Verwandte Produkte für Waldmann CHEKOV