RUSTA 775100050101 Gebrauchsanleitung Seite 3

All manuals and user guides at all-guides.com
CONTENTS
Laser projector
Ground stake
ASSEMBLY INSTRUCTIONS
1. Fit the ground bracket to the laser by first unscrewing the metal frame from the laser.
Then remove the screw from the ground bracket. Screw the ground bracket to the
frame and then reattach the frame to the laser. Stick the laser into the ground and
angle to the desired position.
2. The laser can also be used without the ground bracket. Then angle the bracket as a
support leg and place directly on the ground.
3. Plug the laser in and use the remote control to set the desired program. Do not forget
to extend the antenna on the remote control and check that the battery is inserted
correctly.
Metal frame
AC adapter (IP 44)
Remote control
Ground stake
3