Preparation To Use - EIVOTOR b2 Bedienungsanleitung

EIVOTOR-b2 Bluetooth Speaker

Preparation to Use

USB charge
1.Connect EIVOTOR-b2 with a USB line.
2.When it charge, the light will be red.When charge was
done, the light will turn blue.
3.After charge finish, please take out charger of port.
4.Power off/on will not affect charge.
5.One charge takes about 3-4 hours. It's better to charge
12 hours for the first use.
Warning
1.Light will turn red when battery is low.
2.When battery down, EIVOTOR-b2 will turn-off automatically.
Power button and volume control
1.Long press about 3 second to turn on.
2.Long press about 3 second to again to turn off.
3.Twist clockwise and volume turn bigger.
4.Twist anticlockwise and volume turn smaller.
All manuals and user guides at all-guides.com
English
-3-
English
Functions
Connect device
·First use : please turn on the speaker, and open your
device's Bluetooth. Then search "EIVOTOR-b2". The blue
light indicator turns slowly twinkle means connected. If need
password, please input "0000".
·Auto connect
Once connected, the Bluetooth speaker had saved device which
matched before, and auto connect in the next time. When matching,
green light flashes a few second.
Note: A portion of device does not support automatic connection,
maybe need to match and connect
·Relieve existing connection
If you want to relieve an existing connection, reconnect to another
device. Please close the original Bluetooth device, and then long
press hands-free key for 3 seconds, until the indicator light flash,
connect the new device.
Hand-free answer
·In-Call Hands-free
If connect with a mobile phone, you can use the speaker to achieve
hands-free calls.
When a call is coming, short press the hands-free button to switch
on to pick up. And long press to reject a call.
After hang up , this product will automatically resume to play music.
EIVOTOR-b2 Bluetooth Speaker
manually .
-4-