LENCO LFM-220BK Bedienungsanleitung Seite 27

NOTE: Ensure the Power Switch is set to "LIGHT&FOG" to use the countdown with fog.
- REP
Press the REP button on the remote control to select play animation. "AL" means repeat
all.
"SI" means, repeat the animation which is showing
"RA" means, play the animations randomly.
Selecting the speed
- AUTO
Press the "AUTO" button for the Animations reacting to the music automatically
- SPEED 1
Press the SPEED 1 button, the Animations move at level 1
- SPEED 2
Press the SPEED 2 button, the Animations move at level 2
- SPEED 3
Press the SPEED 3 button, the Animations move at level 3
Pairing a new RF remote control
If the remote control is defective and you got it replaced or you want to use the Lenco PA-360
remote control, it has to be paired with your LFM-220BK first.
Follow the below procedure:
1- Press and hold the Light ON/OFF button on the new remote control for 3 seconds, to
start the pairing mode
2- The lights will display "OK", when pairing is successfully completed.
3- Now the new remote control is ready for use.
27
OPERATING