Product Features - BeeSecure BEE-HUB Bedienungsanleitung

V1.0

1.4 Product Features

BEE-HUB is required to view your device status and control your devices from the APP. Each hub can
support max. 16 devices and can be extended to 32 together with BEE-REPEATER. The
communication range between the hub and your BeeSecure devices is 20 meters (depending on
working environment, the distance may vary if there are too many
walls in between or placed near high power electric appliances). For spacious building, it is suggested
to add BEE-REPEATER to extend the work range between the hub and devices.
By using BEE-HUB, you can achieve the following features
Add devices
•
Set up your devices remotely
•
1.5 Steps to Follow
• Step 1: Download BeeSecure App and register
• Step 2: Add BEE-HUB to Wi-Fi from the App
• Step 3: Pair BeeSecure Devices with BEE-HUB from the App
• Step 4: Set up BEE-HUB
Read the full version of user manual online or follow BeeSecure in-app instructions to add and set
up your hub
2. LED Indicator Light Description
Indicator light status
Blue flash Hub Power on and ready to add the
hub to Wi-Fi
Blue constant light Joined the Wi-Fi network successfully
Green flash Ready for new device to be joined
Green constant light Smart device successfully added
Blue and Green Reset
flashes alternately
3. Notice
1. Place the hub at room temperature
2. Do not expose the hub to rain or moisture
3. Avoid throwing or using violent force on the hub to avoid damage
4. Do not attempt to open or modify the product
5. Use the standard voltage and current indicated in the "1.2 Specifications" or a CE certificated
power adapter
6. Do not place the hub near other wireless devices which generate high power signals. The
transmission may be interrupted among devices. Consult your reseller for suggestions if
needed
•
•
Status
Only when hub is added for the first time, after
reset or when deleted from the APP
At working mode
Press hub button ONCE to add new device
After device has been added, the light will switch
to constant blue
Long press the hub button, then the hub is reset
to manufacture mode
Scheduled Alarm Task
View devices status remotely
Remarks
English