Herunterladen Diese Seite drucken

INTRATONE SC-03 Installationsanleitung Seite 13

Neue video-gegensprechanlage intracode (mit farbbildschirm)

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

EN : What is the failure ?
Message on display: "Communication fault"
Keys and or LCD screen not backlit
Backlit keys while the display is not (or vice versa) Contact our technical services
When passing a badge, the LED of the reader
turns green, but the door does not open.
The interphone says "Call in progress" but the
resident does not hear the visitor
The platinum says "Call impossible" without call
tone
The resident does not see the visitor in his phone
Warranty operating guarantees:
The Intracode video intercom is guaranteed within a temperature range of -20°C and +60°C and at a relative
humidity level not exceeding 70%.
It must be installed according to the Top/Bottom directions given in these instructions and on the device.
The installation must be carried out by qualified personnel with the necessary knowledge for a safe assembly of the
equipment.
Do not install outdoors in extreme temperatures (Finland, Sweden, Norway).
This kit includes the necessary elements to ensure a safe installation of the equipment. Use only the screws supplied
with the device. Using other screws may degrade the device, allow moisture to enter, prevent it from being securely
fixed to the wall.
End-of-life recycling of the product:
The Intracode video intercom and its accessories must not be discarded with unsorted municipal waste,
but must be disposed of via the WEEE (Waste Electrical and Electronic Equipment) collection and recycling
system.
Simplified declaration of conformity
The undersigned, COGELEC, declares that access control type radio equipment for collective housing is in
compliance with Directive 2014/53 / EU (RED).The full text of the EU declaration of conformity is available
at the following internet address:
V233-5069-AA 13/16
Help
- Check the wiring between the block, the board and the
central unit: D + / D-
- The display must indicate the greeting.
- Bad wiring on + and or - terminal blocks
- Relay of the central does not work.
- Check wiring between the control panel and the door
Review A + / A- wiring
Check wiring to the block and leds level
Phone network not available
-Check wiring V + / V-
http://certificates.intratone.com/
How to solve the problem!

Werbung

loading

Diese Anleitung auch für:

01-0201