Einhell bavaria BFMR 1100 Gebrauchsanweisung Seite 6

Anleitung BFMR 1100 SPK1
GB
Proper usage
This machine is designed to mix liquid and powdery
building materials such as paint, mortar, adhesive,
plaster and similar substances. It must be fitted with
the correct mixing tool for the consistency and
quantity of material in question in order to achieve
the required mixing effect. The machine can also be
used as a drill.
Description (Fig. 1)
1 On/Off switch
2 Clockwise/Anti-clockwise switch
3 Chuck
4 Additional handle
5 Chuck key
6 Speed control
7 Locking knob
Technical data
Mains voltage 230 V ~ 50 Hz
Power consumption
Idling speed 0 - 550 rpm
Chuck clamping range max. 13 mm
Drilling capacity in steel
LPA noise level
LWA noise level
Vibration a w
Safety insulated
Weight
Important notes
Read the operating manual carefully and follow the
instructions therein. Make yourself familiar with the
machine, how to use it correctly and the safety
instructions.
Safety instructions
Important! When using electric tools the following
basic safety measures are to be taken to protect
yourself from electric shocks and the risks of
suffering injuries and burns. Read and follow these
instructions before you use the machine. Keep these
instructions in a safe place. The attached booklet
contains further safety instructions.
6
13.08.2005 8:55 Uhr Seite 6
All manuals and user guides at all-guides.com
G Do not use the machine in an atmosphere where
there is a risk of explosion. Do not mix any
solvents or substances that contain solvents with a
flash point of below 21°C.
G Do not place any cables around any parts of your
body.
G Only use extension cables that are suitable for the
area in which you are working.
G Only start and stop the machine in the mixing
vessel. Ensure that the mixing vessel is placed on
a firm, secure base.
G Do not reach into the mixing vessel with your
hands or any other objects during the mixing
process.
G We recommend that you wear gloves and safety
goggles when working with the mixing machine.
G You must wear close-fitting clothing.
G Always use the additional handle.
G Always expect reaction torque.
Before starting the machine
Before you connect the machine to the mains supply
make sure that the data on the model plate are
identical to the mains data.
1050 W
Fit the additional handles (4) to the unit.
Starting the machine
13 mm
Switching on/off
87 dB(A)
Select the speed by pressing the switch to a greater
98 dB(A)
or lesser extent.
< 2.5 m/s 2
To pre-select the speed turn the knurled screw on
the switch.
II /
3.2 kg
Switch on: Push the switch (1)
Continuous operation: Lock the switch (1) with
the locking knob (7)
Switch off: Press the switch (1)
briefly
You can select the direction of rotation using the
switch (2).