VORWORT Herzlichen Glückwunsch und vielen Dank, dass Sie sich für ein Produkt aus dem Hause LINDEMANN entschieden haben. Wir entwickeln und fertigen unsere Produkte seit 25 Jahren in Deutschland und haben unsere ganze Erfahrung und Passion in die Klangqualität dieses Produktes gesteckt. Leh- nen Sie sich zurück und entdecken Sie Ihre Lieb-...
Netzgerät. Ein Betrieb mit einem anderen als dem bei- EU-Konformitätserklärung liegenden Netzgerät führt zu Haftungsausschluss und Gewähr- Mit dem CE-Zeichen erklärt LINDEMANN audiotechnik GmbH, leistungsverlust. Das Netzgerät ist nur spannungsfrei, wenn es dass das Produkt die grundlegenden Anforderungen und Richt- nicht mit einer Netzsteckdose verbunden ist! linien der Europäischen Union erfüllt.
Musikwiedergabe auf das Niveau der besten HiFi-Geräte an- Für die Stromversorgung wird ein hochwertiges „medical grade“ heben. Der Limetree USB-DAC kann als reiner Kopfhörerverstär- Steckernetzteil eingesetzt, das eine besonders hohe Entkopplung ker genutzt werden, aber auch gleichzeitig als Vorverstärker für von Störungen aus dem Stromnetz sicherstellt.
Seite 7
FUNKTIONSBESCHREIBUNG Output 5V DC 6. Analoger Line-Output zum Anschluss von Endstufen oder aktiven Lautsprechern. 7. Digitaleingang 2: optischer Digitaleingang (TOSLINK) 8. Digitaleingang 1: koaxialer Digitaleingang (75 Ohm LPCM). 9. USB-B-Eingang: USB Audio Class 2 Port 10. Kleinspannungsanschluss 5 V DC. Achtung: Es darf nur das mitgelieferte Steckernetzteil verwendet werden.
6. Dimm-Taste: Steuert die Helligkeit der LEDs. 2. Mute-Taste: Schaltet die Lautstärke stumm. 7. Skip-Tasten: Springen zum vorherigen/ nächsten Titel. 3. Volume-Tasten: Einstellung der Lautstärke. 8. Eject-Taste: beim Limetree USB-DAC nicht 4. Eingangswahl-Taste: Auswahl des aktiven belegt. Eingangs. 9. Play/Pause-Taste: Abspielen oder Pausieren 5.
INBETRIEBNAHME • Verbinden Sie das beiliegende Steckernetzteil mit einer Netz- Um den Limetree USB-DAC als Sound-Ausgabe für Ihr Notebook steckdose und das Kabel mit dem 5 V DC – Eingang des Limetree oder Ihren Desktop-PC zu verwenden, muss das Gerät in den Ge- USB-DAC.
Seite 10
10 DE INBETRIEBNAHME Installation unter MacOS Nach dem Einschalten des Limetree USB-DAC wird das Gerät von MacOS erkannt und automatisch eingerich- Apple tet. Zur manuellen Einrichtung des Gerätes navigieren Sie bitte unter Systemeinstellungen > Ton. Hier können Sie das Gerät für die Tonausgabe auswählen.
TECHNISCHE DATEN Stromaufnahme: 0,1 W Standby, 3 W Betrieb D/A-Wandler: ES 9038 Sabre DAC Stromversorgung: 5 V DC DAC-Filter: Minimum phase slow roll-off filter Abmessungen: 107 x 40 x 107 mm (B x H x T) Ausgangsspannung: 2,0 V @ 0 dB FS Gewicht: 292 g Einstellbereich der Lautstärkeregelung: 80 dB in 1 dB - Schritten Kopfhöreranschluss: 3,5 mm Klinkenbuchse...
12 DE GARANTIE Unsere Produkte werden ausschließlich in Deutschland von ISO-zertifizierten Betrieben gefertigt. Jedes einzelne Gerät wird anschließend bei uns im Hause einer vollständigen, auch mess- technischen Funktionskontrolle unterzogen. Wir gewähren des- halb guten Gewissens eine verlängerte Garantie von drei Jahren. Wichtige Voraussetzung für die Inanspruchnahme dieser verlän- gerten Garantie ist die Registrierung auf unsere Homepage.
Seite 13
LIMETREE USB-DAC YOUR AUDIOPHILE ESSENTIALS 1993-2018 MANUAL www.lindemann-audio.com DE | BEDIENUNGSANLEITUNG |...
14 EN INTRODUCTION Congratulations and thanks a lot for your decision to buy a LINDEMANN product. We have been de- veloping and manufacturing our products in Ger- many for 25 years and put all our experience and passion into the sound quality of this device. Lean back and rediscover your favorite recordings.
• A contact with mains voltages is potentially lethal! Use only reg- EU Declaration of Conformity ular mains outlets and undamaged power cables to operate this With the CE symbol LINDEMANN audiotechnik GmbH declares that device. the product meets the basic requirements and directives of the •...
That way the sound quality of the music playback can be raised to the level of the best hi-fi equipment. The Limetree USB-DAC can be used as a stand- alone headphone amplifier, but also simultaneously as a preamp for active speakers or power amps.
Seite 18
18 EN FUNCTIONAL DESCRIPTION Output 5V DC 6. Analog line output for connecting power amps or active speakers. 7. Digital input 2: optical digital input (TOSLINK) 8. Digital input 1: coaxial digital input (75 ohms LPCM) 9. USB-B input: USB audio class 2 port 10.
7. Skip buttons: skip to the next/previous track. 3. Volume buttons: set the volume level. 8. Eject key: not assigned in the Limetree USB-DAC. 4. Input selector button: selects the active input. 9. Play/Pause key: play back or pause the 5.
If no headphone is plugged in, the line output will be active. • To use the Limetree USB-DAC for the sound output of your notebook or your desktop PC, the device must be set up in the device settings of the computer.
Seite 21
STARTUP Installation on Windows Installation on MacOS After turning on the Limetree USB-DAC, the device will After turning on the Limetree USB-DAC, the device be recognized and automatically installed by the Win- will be recognized and automatically installed by Windows Apple dows updater.
22 EN TECHNICAL SPECIFICATIONS Power consumption: 0.1 W standby, 3 W operation D/A-Converter: ES 9038 Sabre DAC Power supply: 5 V DC DAC filter: minimum phase slow roll-off filter Dimensions (W x H x D): 107 x 40 x 107 mm (4.2 x 1.6 x 4.2 in.) Output voltage: 2.0 V @ 0 dB FS Weight: 292 g (10.3 oz.) Volume level control range: 80 dBs in 1-dB steps...
GUARANTEE Our products are manufactured exclusively in Germany by ISO- certified plants. Each single device is then put to a full, also me- trological functional check at our premises. Therefore with a clear conscience we grant an extended 3-year warranty period. An important prerequisite for making claims under this extended guarantee is the online registration on our website.