Hama 00054133 Bedienungsanleitung Seite 2

G Operating instructions
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Keep these operating
instructions in a safe place for future reference.
1. Safety Instructions
• The product is intended for private, non-
commercial use only.
• Protect the product from dirt, moisture and
overheating and use it in dry rooms only.
• Do not use the product in the immediate vicinity
of heaters or other heat sources or in direct
sunlight.
• Do not drop the product and do not expose it to
any major shocks.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
qualified experts.
• Do not open the device or continue to operate it
if it becomes damaged.
• Do not modify the product in any way. Doing so
voids the warranty.
• Keep this product, as all electrical products, out
of the reach of children!
3. System Requirements
The Card Reader supports the following operating
systems:
• Windows 10 / 8 / 7 / Vista / XP
• Mac OS 10.x
3. Product Features
The product supports the following memory cards:
• SD / SDHC / SDXC
• MicroSD / microSDHC / microSDXC
4. Getting started and operating
Note – Compatibility USB 1.1
• The USB 2.0 Card Reader is backwards
compatible to USB 1.1.
• No additional drivers are needed. The
installation runs automatically.
2
All manuals and user guides at all-guides.com
• Connect the USB 2.0 Card Reader to an available
• Plug your memory card into the appropriate
• You can only ever transfer data from/to one
5. Exclusion of Warranty
Hama GmbH & Co. KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use of
the product or from failure to observe the operating
instructions and/or safety notes.
USB port on your computer.
slot of the Card Reader. You can now run the
data transfer between your computer and the
memory card.
memory card, even if multiple cards are inserted.
Warning – Data Loss
• Ensure that the data transfer is done before you
remove a memory card from your Card Reader.
• Always use the eject function of your
operating system before you remove a
memory card from your Card Reader or
disconnect your Card Reader (with inserted
memory card) from your end device.
• Data loss can´t be excluded at disregard!
Note
• Most cards in the SDXC/microSDXC format
are formatted with the exFAT file system. This
system will only be supported by Windows
Vista (from SP1)/7/8/10 and Mac OS 10.6.5
(or higher).
• To also use SDXC/microSDXC cards (with the
exFAT formatting) under Windows XP, you
need at least XP SP2 and the exFAT update
from Microsoft.