MB QUART QM200.3 BMW Montageanleitung Seite 4

ENG
4. Mounting of the speakers
5. Mounting of the subwoofers
To install the subwoofers, the front seats have to be removed,
which are secured with 4 screws. Loosen these screws and then
remove the standard speaker grille. Then replace the original
loudspeakers with the new MB Quart subwoofers.
4
(Tweeters & Midwoofers)
Tweeter interconnection
to the mirror triangle
(Cable color red/silver)
Midwoofer interconnection
(Cable color blue/silver)
Interconnection/signal input
to the amplifier
(Cable color yellow/silver)
Installation option of the crossover housing
with the level adjustment switch for the tweeter.
The switch is located under the crossover cover.
Crossover interconnection:
E +/- signal input to the amplifier
TW +/- tweeter
WF +/- midwoofer
To ensure a optimal and a free movement stroke of the speaker,
you may need to remove a portion of the foam. Set then the
speaker cover back to its location, and re-tighten the screws of
the seat, but please take care that these are tight.
QUARTMOBIL