Westfalia Gross TC1840 Bedienungsanleitung Seite 13

All manuals and user guides at all-guides.com
Required Tool
For mounting the transport cart you will need a large slot screwdriver and
open-end wrenches in the sizes 10, 13 and 14.
Please read the manual and use the included explode drawing for
correctly mounting the transport cart.
Remove all parts from the packaging and check if all parts are complete.
Please ask a second person to assist you while mounting the transport
cart.
Mounting the Rear Axle Support
1. Mount the rear axle support (6) together with the left and right axle braces
(7 and 8), as shown in the drawing. For mounting, use the M8x20 mm
screws (21) together with the washers and nuts.
2. Install the wheels on the rear axle support. Tighten the wheels with the
washers, the screws and nuts.
Mounting
1
8
8
6
7