Inhaltsverzeichnis
Werbung
EN
Disclaimer and Warning
Congratulations on purchasing your new DJI OSMO
lawful practices DJI OSMO provided carefully before use. Failure to read and follow instructions and warnings
may result in serious injury to yourself or others, damage to your DJI OSMO product, or damage to other objects
in the vicinity. By using this product, you hereby signify that you have read this document carefully and that you
understand and agree to abide by all terms and conditions of this document and all relevant documents of this
product. You agree to use this product only for purposes that are proper. You agree that you are solely responsible
for your own conduct while using this product, and for any consequences thereof. DJI OSMO accepts no liability for
damage, injury or any legal responsibility incurred directly or indirectly from the use of this product.
DJI is a trademark of SZ DJI OSMO TECHNOLOGY CO., LTD. (abbreviated as "DJI OSMO") and its affiliated
companies. Names of products, brands, etc., appearing in this document are trademarks or registered trademarks
of their respective owner companies. This product and document are copyrighted by DJI OSMO with all rights
reserved. No part of this product or document shall be reproduced in any form without the prior written consent or
authorization of DJI OSMO.
This document and all other collateral documents are subject to change at the sole discretion of DJI OSMO. For up
to date product information, visit http://www.dji.com and click on the product page for this product.
This document is available in various languages. In the event of divergence among different versions, the English
version shall prevail.
Introduction
When used with the DJI PROSSD Mount, the DJI PROSSD 1TB can be installed on a DJI Ronin 4D to record video
in ProRes RAW or 8K resolution.
Usage
Insert the PROSSD card. Make sure the button on the PROSSD Mount pops up and there is a clicking sound. Go
to the menu of the high-bright main monitor, tap Recording, then Storage, and select DJI PROSSD.
Press the button on the PROSSD Mount to remove the PROSSD card.
Status LED
Solid white
Blinks white
2
Description
On standby
Reading/writing data
TM
product. Please read this entire document and all safe and
Werbung
Inhaltsverzeichnis
