fontastic Party II Bedienungsanleitung Seite 2

User Manual
Thank you for choosing a Fontastic Product. Please read this user manual carefully and
®
comply with the safety instructions.
Package contents
• Wireless Speaker Fontastic PartyII
®
• Micro-USB Charging Cable
• Audio Aux cable
• User Manual
If any of the above pieces is missing,
please pack the product again and return to dealer.
Overview
1. Speaker
2. Panel
3. LED Light
4. On/Off Button, turnable
5. AUX In
6. Micro USB Connector
7. Next Track / Volume +
8. Multifunction Button
9. Start/Stop Button
10. Previous Track / Volume -
11. TF Slot
12. Display
13. USB Connector
14. LED
15. Microphone Connector
Getting Started
Charging the battery
Fontastic PartyII is equipped with an internal, rechargeable lithium-ion battery. Connect the
®
Micro-USB Cable included with it with the Micro-USB charging port (5) of the Fontastic
PartyII. The cable can be connected to a computer or a standard USB power adapter.
The red LED (14) of the speaker lights up while charging. The standard charging time is 2-3
hours. The red LED (14) turns off when the speaker is fully charged.
The cable can be disconnected.
Note: Charge the speaker for at least 2.5 hours before initial use.
Switching On /Off
To turn on the speaker, turn the On/Off button(4) right (ON) or left (Off).
Pairing
The speaker must be connected to a Bluetooth
audio files. Turn on the speaker by sliding the On/Off Button (4) to the right (ON).
1. Search your Bluetooth device from which you want to play the audio files for Bluetooth
®
audio devices (Bluetooth from audio source must be activated).
2. The PartyII speaker should be listed.
3. Select the speaker „PartyII" to pair. You should now be connected to the
Fontastic PartyII speaker. A beep tone sounds for confirmation.
®
Note: If the connection with the device is lost or the device temporarily disconnects,
Fontastic PartyII automatically tries to restore the connection.
®
Multifunction Button
In order to change the play mode from Wireless Music streaming, USB, TF card or
FM Radio Mode, please press the Multifunction Button (8) to get in to the desired music
streaming mode.
Speaker LED Light Control
Press and hold the Multifunction Button (8) for few seconds to Switch on or off the LED Light
of the Speaker system.
Music control
To play or stop the music, press the Start/Stop Button (9).
To skip to the previous track, press the – BWB (10).
To skip to the next track press the + / FFW(7).
Volume Control
The On/Off button (4) support the Volume Control system of Fontastic
you can adjust the Volume by pressing and holding the Next Track or Previous Track Button
(7,10) to reach the desired Loudness (in Display you can see the Volume Level 0 to 30 ).
TWS
(wirelessly connection between two Fontastic PartyII Speakers)
Close the Bluetooth mode of your Streaming source such as Mobile phone.
®
Switch on both PartyII Speakers on same time .
Wireless Speaker Party II
Party II 2
1
12 13 14 15
Panel
11
10 9 8 7 6 5
device to wirelessly transfer and output
®
PartyII. Beside this
®
Press and hold the Start/Stop Button (9) of one of the Speakers for few seconds.
The PartyII Speakers will connect each other wirelessly. In order to connect your Bluetooth
source with Party II, please follow the Pairing procedure.
Once the PartyII Speakers are paired with each other and Mobile phone, they will connect to
each other and Smartphone automatically.
Music Streaming
Music wirelessly
When paired with a device, press the Start/Stop Button (9) to start the Music Streaming.
Press the Start/Stop Button (9) once more to pause the Music streaming.
Note: The device must support the A2DP profile for music streaming and the AVRCP profile
for music remote control.
Play music from a memory card or USB storage medium
Insert a Micro-SD memory card with audio files into the TF slot (11) or USB memory of the
Fontastic PartyII (13). Selet by pressing the Multifunction Button (8) to start the memory card
3
or USB-Flash Play Mode. The files stored on the media will start to play.
FM Radio
Press the Multifunction Button (8) to switch to radio mode. If you press the Start/Stop-Button
(9) the speaker will scan the FM band width for suitable radio stations and bookmarks them.
Once the search is finished, the speaker will play the last found station and you can switch
4
between stations with the forwards and backwards buttons (7,10).
Technical data:
• BT V 4.2 + EDR
• Profiles: A2DP, AVRCP
• USB Socket / TF-Card slot
• Speaker: 6.5" Diameter, 10 Watts
• Microphone Socket
• Charging Status LED: Red/Blue
• Power input: 5V DC
• Micro USB charging port
• Rechargeable and protected 1200 mAh Battery
®
• Operating time: 1-3 hrs.
• Material: PP
• Dimesions: 250 x 160 x 360 mm (LxWxH)
• Weight: 1.45 Kg
Safety Warnings:
• Do not open the device
• Do not hold the device under water
• Keep it safe from humidity
• Do not connect the adapter to the device by using force
• Keep the device away from children
• Disconnect electronic devices from the power when not using them for longer time.
• Do not use the device when it has visible defects.
In case you need technical support, please contact our support-team by e-mail under
®
service@fontastic.eu.
Registration and Safety
Certification/General Information
We hereby declare, that this device carries the CE mark in accordance with the regulations
and standards. It conforms with the fundamental requirements of the (RED) 2014/53/EU,
as well as the RoHS 2 2011/65/EU dircetive. The full text of the EU declaration of conformity
is available at the following internet address:
Note on environmental protection:
After the implementation of the European Directive 2012/19/EU in the national legal
system, the following applies:
Electrical and electronic devices may not be disposed of with domestic waste.
Consumers are obliged by law to return electrical and electronic devices at the end
of their service lives to the public collecting points set up for this purpose or point of sale.
Details of this are defined by the national law of the respective coun-try. This symbol on the
product, the instruction manual or the package indicates that a product is subject to these
regulations. By recycling, re-using the materials or other forms of utilising old devices, you
are making an important contribution to protecting our environment.
Technische Änderungen vorbehalten / Fontastic, by D-Parts GmbH ● Birkenweiherstr, 16 ● 63505 Langenselbold, Germany / V2_01_22
GB
www.d-parts.de/Konfo
®