fontastic Cald Bedienungsanleitung Seite 2

Please read these instructions carefully before using the device.
Package contents
• Fontastic Hand Warmer & Power Bank Cald
®
• Hand strap
• Micro-USB cable
• User manual
If any of the above content is missing, please re-pack the product
and return to your dealer.
Overview
1. USB output
2. Micro-USB input
3. On/Off switch
4. Status LED
5. Loop for hand strap
Start-up procedure
Charge power bank
Fontastic Hand Warmer & Power Bank Cald is equipped with an internal rechargeable lithium polymer battery.
®
Connect the hand warmer using the Micro-USB cable which is included in delivery. The cable can be connected to any USB charger or
computer. Maximum charge current is 5V/1A. At full charge, all three LEDs will light and the charging process ends.
Disconnect the power bank from the charger.
Note: Charge the power bank fully before initial use. Charging time may vary depending on the USB charger used.
Check battery level of the power bank
To check the battery level, press the On/Off switch shortly. The LED lights will illuminate for several seconds and will show the battery level.
Three LEDs means your power bank is fully charged, one LED means it is almost empty.
Charge devices using the power bank
To charge devices using the power bank, simply connect the charging cable to the USB port of the power bank.
The charging process will start. Remove the cable from the power bank after use.
Heating function:
1. To activate the heating function, press the on/off switch for 2-3 seconds. The control LED for the heating function lights up red.
2. Press the on/off switch again to enter the next higher heating level. Now two red indicator lights are lit.
Repeat this step for the last heating step.
3. Press the on/off switch for 2-3 seconds to turn off the heating function.
Note: If the specified temperature is not reached, the powerbank is not sufficiently charged. First, fully charge the powerbank.
Heating and charging functions can not be used simultaneously.
In case you need technical support, please contact our support-team by e-mail under service@fontastic.eu.
Technical data:
• Battery: 5.200 mAh Li-Polymer
• Input Voltage: 5V DC 1A via Micro USB
• Output Voltage: 5V DC 1A
• Connectors: 1 x USB-A (Output)
1 x USB-A (Output)
• Dimensions: 102 mm x 58.8 mm x 24 mm
• Weight: 135 g
Note on environmental protection:
After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies: Electrical and
electronic devices may not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic
devices at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined
by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product
is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices, you are making an important
contribution to protecting our environment.
Disposal of used rechargeable batteries:
As the end user, you are required by law (EU Battery Directive 2006/66/EU) to return all used rechargeable batteries; disposal of them in the
household waste is prohibited. Contaminated rechargeable batteries are labelled with these symbols to indicate that disposal in the domestic
waste is forbidden. You can return your used rechargeable batteries free of charge at the official collection points of your
community or where ever batteries and rechargeable batteries are sold.
We hereby declare, that this device carries the CE mark in accordance with the regulations and standards.
It conforms with the fundamental requirements of the EMC directive 2014/30/EU, as well as the RoHS 2 2011/65/EU dircetive.
The full text of the EU declaration of conformity is available at the following internet address:
Fontastic bei D-Parts GmbH, Birkenweiher Str. 16, 63505 Langeselbold, Germany / Technical specifications are subject to change without notice. 01_22
®
USER MANUAL
Hand Warmer & Power Bank „Cald"
Safety advice:
• Do not open the device
• Do not hold the device under water
• Keep it safe from humidity
• Do not connect the power output to the power input or vice versa
• Do not connect the adapter to the device by using force
• Keep the device away from children
• Disconnect electronic devices from the power when not using them for longer time.
• Do not use the device when it has visible defects.
3
2
1
4
5
www.d-parts.de/Konfo
GB