Component List; Technical Data; Noise Information; Vibration Information - Worx Sonicrafter WX696 Originalbetriebsanleitung

Unlock
LED light is a battery capacity
=
indicator and will flash when power
- - -
- - -
gets low.

2. COMPONENT LIST

1. ON/OFF SWITCH
2. BATTERY PACK*
3. VARIABLE SPEED DIAL
4. UNIVERSAL-FIT ACCESSORY INTERFACE**
5. LED LIGHT
6. FLANGE
7. ONBOARD HEX WRENCH
*Not all the accessories illustrated or described
are included in standard delivery.
**Works with other oscillating tool brands' acces-
sories.
The following brands are trademarks owned by third
parties which may be registered by their respective
owners:
® ®
Black & Decker , Bosch , Chicago Electric
Dremel ® , DeWalt ® , Fein ® , Genesis
® ®
Makita , Mastercraft , Milwaukee
® ®
Cable , Ridgid , Ryobi®, Skil

3. TECHNICAL DATA

Type Designation WX696 WX696.X
(6-designation of machinery, representative of
Oscillating Tool)
Voltage
Oscillations speed
Oscillating angle
Machine weight (Bare tool)
***Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
****X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models
20V Cordless Oscillating Tool
®
, Craftsman
® , Imperial Blades,
® ®
, Performax , Porter
® ®
, Rockwell and Tool Shop
WX696 WX696.X****
20 V Max***
5000 - 18000 /min
3.6°
0.9 kg
Category
20V Battery
20V Charger
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K & K
pA wA
Wear ear protection.
®
,

VIBRATION INFORMATION

®
.
Vibration total values (triax vector sum) determined
according to EN 62841:
Vibration emission value:
a = 2.805m/s 2 Uncertainty K = 1.5m/s2
h
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a preliminary
assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ
from the declared value depending on the ways
in which the tool is used especially what kind of
workpiece is processed dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
Type Capacity
WA3550 1.5Ah
WA3550.1 1.5Ah
WA3551 2.0Ah
WA3551.1 2.0Ah
WA3553 4.0Ah
WA3760 0.4A
WA3869 2.0A
WA3880 2.0A
L : 73.0dB(A)
pA
L : 84.0dB(A)
wA
3 dB(A) 9
EN