Technical Data - EINHELL CE-AP 18 Li Originalbetriebsanleitung

The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Rated voltage: ........................................ 18V DC
Protection class: ................................................III
Max. working pressure: ........ 5.3 kPa (0.053 bar)
Max. air delivery rate: ............................670 l/min
Idling speed no ................................. 18,700 rpm
Approx. weight without battery: ..................0.6 kg
Sound pressure level L
Uncertainty K ...................................... 3 dB (A)
pA
Sound power level L
WA
Uncertainty K ...................................... 3 dB(A)
WA
Sound power level L
WAd
Important!
The machine is supplied without rechargeable
batteries and without a charger, and is allowed to
be used only with the lithium-ion batteries of the
Power-X-Change series!
The lithium-ion batteries of the Power-X-Change
series are allowed to be charged only with Power-
X chargers.
Handle
Vibration emission value ah = 2.14 m/s
Uncertainty K = 1.5 m/s
The noise from the equipment might exceed 85
dB(A). The operator will require noise protection
measures if this is the case.
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
Anl_CE-AP_18_Li_Solo_SPK13.indb 16 Anl_CE-AP_18_Li_Solo_SPK13.indb 16
....................... 83 dB(A)
pA
............................ 94 dB(A)
.......................... 97 dB(A)
2
2
GB
The stated vibration emission levels and stated
noise emission values can also be used to make
an initial assessment of exposure.
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Important!
The vibration value changes according to the
area of application of the electric equipment and
may exceed the specifi ed value in exceptional
circumstances.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
Danger!
The electric power tool generates an electro-
magnetic fi eld during operation. Under certain
circumstances this fi eld may actively or passively
impede medical implants. To reduce the risk of
serious or fatal injuries, we recommend persons
with medical implants to consult their doctor and
the manufacturer of the medical implant prior to
using the equipment.
- 16 -
29.07.2021 15:20:28 29.07.2021 15:20:28