Herunterladen Inhalt Inhalt Diese Seite drucken

Subzero HOME RECORDING BUNDLE BASE-2 Bedienungsanleitung Seite 7

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 12
To start the installation, launch the setup program,
which is an .exe fi le that is inside a recent driver
download from the Gear4music website. The link is
below:
https://www.gear4music.com/driver-downloads
Alternatively, you can fi nd the driver in the
Windows folder of the included Installation DVD,
by double clicking on it. Typically the fi lename
is something like SZ A12 USB vX.YY_setup.exe
where X.YY is the version number of the driver.
When launching the installer, Windows might
display a security message. Make sure to allow the
installation. For information about the EV certifi cate,
contact Gear4music Customer Service on the
contact details at the end of the manual. After that,
the following dialog on the left will appear.
Click Next.
Now click Install. Files are now being copied.
You will be prompted with a Windows Security
message. Confi rm it by clicking Install. After a while
the installation then will be completed, and the
following dialog will appear:
Once you see the window on the above, click
Finish. We strongly suggest to select Yes, restart
the computer now and then click Finish. You can
connect the interface to your computer anytime
if not done yet. Windows will automatically setup
the system so you can use the device. Once the
system starts again and you are logged in with the
hardware connected, you will see that the interface
control panel is now automatically being loaded
by looking at the SZ icon in the taskbar notifi cation
area. If you can see it, the driver installation has
been completed successfully.
WINDOWS AUDIO SETTINGS
In the Windows Control Panel (under Hardware
and Sound > Sound), you can select the default
playback device that is used by all audio
applications that don't have their own preferences,
you can select the SZ-AI2 and make it your
default audio playback device. However, most
DAW recording software will allow you to set up
an additional output, allowing you to just use
the interface for sending sound to active studio
monitors whilst recording, for example.
7
EN

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Base-2

Inhaltsverzeichnis