Specifications - Ratio Electric SMART BOX Bedienungsanleitung

32
P: power (kWh)
Et: total kWh value
(never reset)
By pressing the middle button, you can see the meter readings of the last 5
sessions.
Et (1): kWh
Et (2): kWh
Et (3): kWh
Et (4): kWh
Et (5): kWh
CHARGER ERROR
CHARGER
NOT READY
ERRCODE: ...............
www.ratio.nl

SPECIFICATIONS

Charging System
Cable version car connector
Outlet version
Power input
Power output
Earth leakage protection
Dimensions
Housing
Weight
Environment Operating
Temperature
Marking
www.ratio.nl
P 1:
P 2:
P 3:
Et:
The values can be deleted by pressing the left and
right arrow buttons at the same time.
With the middle button you can go back to the
previous screen.
In case of the charger error, you will see the error
screen with the error code. If multiple errors occur
the codes will alternate.
By error message please contact Ratio Electric for
support.
To return into the setup menu please press the
middle button for 5 seconds.
IEC61851, Mode 3
IEC 62196, type 1 or type 2
IEC 62196, type 2 Outlet
single-phase or 3 phase, 230V-400V, 16 A-32A
3,7 kW, 7,4 kW, 11 kW, 22 kW
AC 30mA, DC 6mA
400mm x 250mm x 105mm
PC/ABS-VO
4 kg (incl. cable)
IP54, rain-tight
-25°C to +40°C
CE
kWh
kWh
kWh
kWh