Warning Symbols; General Safety Instructions - MP glass LYON CHIC 90 Montageanleitung

WARNING SYMBOLS

EN
Read the instructions
carefully.
Class II. Double insulation.
This miroir cannot be
earthed.
LED 220-240 V
CRI 80 - 6500°K
IP44
Protection rating:
Protected against solid objects
greater than 1 mm.
Protected against splashing
water from all directions.
Compliance with European
Regulatory Requirements.
This product contains a light
A
G
source of energy efficiency
G
class "G"
The light source contained in this luminaire
may only be replaced by the manufacturer
LED
or his service agent or a person of equiva-
LED lent qualification. Danger, risk of electric
50000h
shock.
The driver contained in this luminaire
should only be replaced by the manu-
facturer or his service agent or a person
2 3
NEW
0 V
of equivalent qualification. Danger of
electric shock.
10

GENERAL SAFETY INSTRUCTIONS

Read this user manual carefully before using the appliance, and keep it for future
reference and pass it on to a third party if necessary.
WARNING:
! When using electrical appliances, comply with basic safety
precautions in order to reduce the risk of fire, electric shocks and personal injury.
If the external flexible cord of this luminaire is damaged, it must be replaced by the
manufacturer, or his after sale service, or any person of equivalent qualification
only to avoid any risk. The external flexible cord must only be replaced by a cord
having the same characteristic : H05VV-F 2 x 1 mm²
GENERAL INSTRUCTIONS
No-one, and in particular no child, must be in the vicinity of the workplace. Check that
the electrical specifications of this miroir are compatible with your installation.
WARNING:
!
- The power supply must be switched off before installation, maintenance or
cleaning. Remove the fuse or de-activate it, and make sure that it cannot be re-
activated.
- Before drilling a hole, make sure that there is no risk of drilling through an existing
non-visible cable or pipe.
The miroir must be installed by a qualified electrician in accordance with the
wiring standards in force in the country where the installation takes place.
11
EN