Installation - Oneconcept Growbox Bedienungsanleitung

tructions
First assemble the framework which
1
is the basis of the tent. The black
plastic covers in the corner angles
must point downwards.
You can easily stick the tubes into
the corner angles. Make sure you
stick the tubes firmly into the corner
angles until they snap into the press
studs.
Grow Tent Assembly Instructions
The press studs must point inside so
that they do not get caught in the For Tent Size:60x60x120-160cm
tarp.
Unfold the tarp completely. Unzip it
2
fully but leave the side doors closed
yet. Make sure the tarp is put up with
the right side. The ventilation holes
with the mesh cover must be on the
bottom and the logo on the top.
Carefully lift the framework into the
tent. Position on corner of the frame
into the tarp first before you take on
the next corner. Precede with utmost
care when drawing the tarp over the
corners.
All manuals and user guides at all-guides.com

Installation

80x80x160-180cm
90x90x180-200cm
7