Connecting The Speaker - Sonoro GRAND ORCHESTRA SO-1200 Bedienungsanleitung

For better acoustic decoupling from the floor, we
recommend using the supplied speaker spikes. Just
like the feet, they can be adjusted in height by
turning.
To do this, first unscrew the pre-assembled speaker
feet and replace them with the spikes.
Please take care of your floor and protect it with the
included spike pads if necessary.
3.3

CONNECTING THE SPEAKER

GRAND ORCHESTRA can be connected to amplifiers
as show in the picture. To avoid short circuits, please
first switch off the amplifier to which you want to
connect your GRAND ORCHESTRA. Connect the right
speaker to the right and left speaker to the left channel
of your amplifier. Be careful not to reverse the polarity
of ✚ and ▬.
12
GRAND ORCHESTRA are delivered with adjustable
speaker feet. By carefully turning the feet, unevenness
of the floor can be compensated to make sure the
speaker stands securely.
Feet
When connecting the speaker cable, take notice of the
following:
Do not let the bare wires of the speaker cable touch
•
one another.
Do not let the bare wires of the speaker cable come
•
into contact with GRAND ORCHESTRA's rear panel and
screws.
Spike
Spike pad
© sonoro audio GmbH 2021