Herunterladen Diese Seite drucken

Lintelek ID115Plus Color HR Benutzerhandbuch Seite 18

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Note:
For iOS smartphones, if you failed to find "ID115Plus Color
HR" in the APP, take the following steps:
a) Go to your smartphone "Settings" → "Bluetooth". Under
"MY DEVICES", find "ID115Plus Color HR", tap on "
→ "Forget This Device" and turn off Bluetooth.
b) Reboot smartphone and open the "VeryFitPro" APP.
When asked whether to turn on the Bluetooth switch,
click OK to search and bind your device.
Failed to charge the device
Make sure the direction of the device's USB plug is correct
when plugging into the USB port for charging. For correct
charging, the device's red indicator turns on and will be off
when the device has been fully charged. Please remove the
device host from the power supply once fully charged.
Prolonged charging may shorten the battery's life.
Failed to receive SMS/Calls notifications
Calls/SMS notification function works when the devicecon-
nects to your smartphone via APP. Please kindly refer to the
following tips:
1) Go to your smartphone system Settings, find "VeryFitPro"
APP and enable the Location and all Notifications.
(Specific setting methods may vary according to different
smartphones.
2) Turn Bluetooth on and go to the "VeryFitPro" APP to bind
the device.
3) Switch "Call/SNS Alert" function on, and click "√" to save
your settings.
Failed to count steps accurately
Regarding the step counting, this fitness tracker has a built-in
3D sensor. It registers your steps when you swing your arm.
Sometimes the data on device may displayed a little delayed.
And it will reset itself if you walk continuously less than 40
steps. To test the accuracy of the pedometer, please walk
casually and continuously up to 100 steps or more.
16
"

Werbung

loading