Inhaltsverzeichnis
Werbung
• Only power the product with the voltage corresponding to the markings on
the product.
• Wipe the battery terminals with a clean dry cloth if they are dirty.
• Non-rechargeable batteries are not to be recharged.
• Do not short-circuit a battery.
• Children of less than 8 years should be kept away.
• Cleaning and user maintenance shall not be done by children without
supervision.
• Make sure to match the (+) and (-) polarity markings.
• Do not clean the inside of the product.
• For more detailed information about disposal of your old battery, check the
local rules and regulations for the correct disposal instructions.
Setting up the product
1. Remove the battery cover A
2. Insert 3 type AA batteries (not included) into the battery compartment. Make
sure that the battery polarity (+/-) matches the polarity markings inside the
battery compartment.
3. If you want to save photos or videos, insert a 4-32 GB Class 10 microSD card
into the microSD card slot A
4. Place back A
i
5. Press the power button A
Look through the ocular lens A
If the screen does not light up, check if the batteries are charged and have
4
been installed correctly.
Using the product
Rain, fog, snow or smoke can negatively influence the viewing distance and
4
image quality.
1. Remove the objective lens cover A
Leave the lens cover A
4
2. Press A
7
to switch on the product.
The product starts up in observation mode.
4
3. Look through the ocular lens A
4. Rotate the diopter ring A
5. Rotate the focus ring A
6. Press the up and down buttons A
In dark environments, the infrared lamp switches on automatically.
4
i
.
u
.
.
7
.
9
. The screen lights up.
1
on during daylight.
9
to adjust the light sensitivity.
q
2
to adjust the focus distance.
.
1
.
to adjust the digital zoom.
45
6
Werbung
Inhaltsverzeichnis
