Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Roll off the power cord comple-
tely before plugging the machine
into the power outlet. The power
cord should not get in contact
with sharp edges or heat sources.
Also prevent contact between
cable and pressing surface of the
device. If the power plug or power
cord is damaged, it must be repai-
red before use.
Do not open the device or other
components (including the power
plug and cable). Repairs may
only be carried out by authorized
workshops.
Never immerse the device in
water or other liquids.
The pressing surface of the
device can reach very high tempe-
ratures: Do not touch it!
General
Danger from
Danger
hot Surfaces
Symbol
Let the device cool down com-
pletely before storing it (approx. 1
hour after use).
Please keep the user manual for
future reference!
Tip: Keep the original carton.
The transfer press is optimally
protected in there and allows a
safe transport in case of warranty.
This device contains raw
materials that can be recycled.
Please dispose of this device in an
environmentally friendly manner
at a collection point in your town
or municipality.
Danger of
WEEE-Reg.No.
bruises
DE72497967
Plug out the
power cable
3
Werbung
