Herunterladen Diese Seite drucken

TE-Group Mr Safe KB-250 Bedienungsanleitung

Werbung

PACKAGE CONTENTS
Kinetic Push button + 230 V Receiver + industrial tape
PARTS & BUTTONS
Kinetic Push button
230 V Receiver
A: Push button
B: Power Plug
C: Tone selection button
D: Volume
INSTALLING AND PAIRING THE KINETIC PUSH BUTTON
You can fix the Kinetic Push Button to any surface using the industrial tape or screw it on the wall. Take
the plastic plate with the 2 screw holes and hold it against the wall you wish to attach it to. By using a
pencil, indicate where you need to drill the holes. Drill 2 holes where the indication is visible. Insert 2
plugs into the holes, place the plastic plate in the correct location and screw it in place. Place the front
of the Push button on the back part until it clicks into place.
You can pair multiple Push buttons (optionally available on www.mrsafe.eu) with the receiver. Simply press
the Tone selection button (C) on the 230 V Receiver for 5 seconds until you hear a double sound notification.
Press the Push button (A) and you will hear another sound notification. After 10 seconds, you will hear
another double sound notification. Your devices are now paired.
INSTALLING AND PAIRING THE 230 V RECEIVER
You can plug the 230 V Receiver into any socket in your house, the pairing for your set has already been
done during production.
To pair an extra 230 V Receiver with your Push button (optionally available on www.mrsafe.eu), press the
Tone selection button (C) for 5 seconds until you hear a double sound notification. Press the Push
button (A) and you will hear another sound notification. After 10 seconds, you will hear another double
sound notification. Your devices are now paired.
SELECTING A RINGTONE AND ADJUSTING THE VOLUME
To select a ringtone on the 230 V Receiver, press the Tone selection button of the device (C) until you
hear the ringtone you wish to select.
Note: When multiple Push buttons are paired to your device, it is not possible to have a separate sound
for each Push button.
To adjust the volume on the 230 V Receiver, press the Tone selection button of the device (C) to hear a
tune and press the Volume button of the device (D) to select the desired volume.
SUPPORT
For more information, technical questions and return requests concerning this product, you should
contact
support@mrsafe.eu
WARRANTY
Mr Safe is a registered trademark of TE-Group NV. The mr Safe brand stands for good product quality and
outstanding customer service. That is why mr Safe warrants this product against all defects in material
and workmanship for a period of two (2) years from the date of original purchase of the product. The
conditions of this guarantee and the extent of responsibility of mr Safe under this guarantee can be
downloaded from our website:
www.mrsafe.eu
DECLARATION OF CONFORMITY
GB
Hereby, Par la présente,
Company /Entreprise:
TE-Group NV
Address: / Adresse:
Kapelsestraat 61, 2950 Kapellen, Belgium
declare that the following equipment: / déclare que le dispositif suivant :
Product name:
mr Safe KB-250
Nom du produit:
Product type:
Wireless Kinetic Doorbell Set
Type de produit:
conforms with the following safety requirements of the directives 2014/53/EC, 2011/65/EC, 2014/30/EC,
2014/35/EC & 2015/863/EU. Conformity is guaranteed by the CE-symbol. This product has been tested against
following standards and specifications. The full text of the EU declaration of conformity is available at the
following internet address: http://www.mrsafe.be/DOC_KB-250.
est conforme aux exigences de sécurité suivantes des directives 2014/53/EC, 2011/65/EC, 2014/30/EC, 2014/35/
EC & 2015/863/EU. La conformité est garantie par le symbole CE. Ce produit a été testé par rapport aux normes
et spécifications suivantes. Le texte complet de la déclaration UE de conformité est disponible à l'adresse internet
suivante: http://www.mrsafe.be/DOC_KB-250.
EN62321-1,2,3,4,5,6,7,8:2015
EN301489-1 V2.2.3:2019
EN62368-1:2014+A11:2017
EN301489-3 V2.2.1:2019
EN330220-2 V3.2.1
EN62479:2010
EN300220-1 V3.1.1:2017
EN50663:2017
EN300220-2 V3.1.1:2017
J. Van Os, Product & Research Manager
Authorized Signature, Kapellen - January 2021
ILLUSTRATIONS
KB-250
WIRELESS
DOORBELL SET
USER'S MANUAL
NL
GB
FR
QRG/MrSafe iBell KB-250/01-21/V01
Copyright©Mr Safe
D

Werbung

loading

Inhaltszusammenfassung für TE-Group Mr Safe KB-250

  • Seite 1 WARRANTY Mr Safe is a registered trademark of TE-Group NV. The mr Safe brand stands for good product quality and USER’S MANUAL outstanding customer service. That is why mr Safe warrants this product against all defects in material and workmanship for a period of two (2) years from the date of original purchase of the product.
  • Seite 2 De voorwaarden van deze garantie en de omvang Mr Safe est une marque déposée de TE-Group NV. La marque mr Safe conçoit des produits de qualité et von zwei (2) Jahren auf alle Material- und Verarbeitungsfehler ab Originalkaufdatum des Produktes.