Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
03
Product Setup
Assembly & Installation
1. Assembling the Mount
A. Connect the Mount Cradle
with the Ball Joint.
2. Selecting a Location
Choose an installation method: Dashboard/ Flat Surface (A) or Windshield/
Curved Glass (B)
Option A
Dashboard or Flat Surface Installation
Choose an area on a flat surface on the vehicle's dashboard and wipe
any dust or debris from the surface.
1. Peel off the flim
2. peel off the protective
on the dashboard
film on the Suction Cup
pad & stick on the
and press mount firmly
desired installation
onto the dashboard
location.
pad.
B. Then, tighten the Cradle
Knob.
STICKY SUCTION CUP
3. Push Locking Lever
down to engage
suction.
Option B
Windshield Installation or Curved Glass Installation
Choose a location on the windshield and wipe any dust or debris
from the surface.
STICKY SUCTION CUP
1. Remove plastic cover from
Suction Cup.
Connecting Power
!
The Easy One Touch Connect Pro is powered via a micro-USB cable. There is no
off/on switch on the device. Once it is plugged in, the device will remain on unless
the vehicle shuts off power when in parking mode.
1. Plug the micro-USB cable into
the USB port on the back of the
Mounting Head.
2. Push Locking Lever down to
engage suction.
2. Insert Car Charger into your
vehicle's power port.
Werbung
Inhaltsverzeichnis
