Technical Data; Box Contents; Maintenance; Transportation And Storage - Greencut WS400 Betriebsanleitung

24

TECHNICAL DATA

Maximum load
Dimensions
Product weight
NOTE: GREENCUT reserves the right to modify the technical characteristics without prior notice.

BOX CONTENTS

-
Sawing stand
-
Mounting kit
- 1x Instruction manual
• Remove the product and accessories from the box carefully. Make sure all the items listed above are present.
• Inspect the product carefully to make sure it has not suffered any breakage or damage during transport.
• Do not discard the packaging material until you have thoroughly inspected the product and used it satisfactorily.
ATTENTION: If any part is missing or damaged, contact the Official Technical Service. Do not use
this product without having replaced the missing or damaged part. Using this product with
damaged or missing parts can cause serious injury to the operator.

MAINTENANCE

• Carry out regular inspections of the product to ensure efficient and safe operation.
• Check for broken and/or loose parts or cracks in the structure. Replace broken parts and tighten loose parts if
present.
• Keep the surface of the product dry and clean.
• Do not expose to prolonged wet or corrosive conditions.

TRANSPORTATION AND STORAGE

• Store this product in a location that is not accessible to children and in a safe, secure and non-hazardous manner
that is dry, clean and protected.
WS400
150 Kg
80x84x80cm
6,6 Kg