Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SETTINGS
------------------------------------------------------------------------------------------------------------------
Searching channels by name in the
Channel Editor
While arranging the channels in the Channel
Editor, you can search and select the channel
name by the first three characters.
1
In the »Channel Editor« menu, select the
search mode by pressing » « (red).
2
Select the first character of the channel
name you want to search with »
«, »
«,
V
Λ
<
>
»
« or »
« and press »OK« to confirm.
Repeat the entry for the next characters.
– Channels found will be listed on the right
side of the screen.
3
With »
>
« switch to result section, select the
channel you are searching with »
« or
V
»
«, and highlight this with »OK«.
Λ
Note:
To change the place of, delete or add the
7
channels to favorites lists, continue reading
the relevant section.
4
To return to the previous menu, press
»BACK <
«.
5
To exit the »Channel Editor« menu, press
»EXIT«.
Deleting channels in the Channel
Editor
1
In the »Channel Editor« menu, select the
channel(s) you want to delete with »
«,
V
<
>
»
«, »
« or »
«, and highlight the televi-
Λ
sion channel by pressing »OK«.
– Channel is marked with » «.
2
Press »
« (yellow).
– »Tools« menu is displayed.
3
Select the line »Delete« with »
« or »
«
V
Λ
and press »OK« to confirm.
4
To confirm deletion process, press » «
(green);
or
to cancel deletion process, press » « (red)
button.
5
To exit the »Channel Editor« menu, press
»EXIT«.
Moving the channels in the chan-
nel organizer to different channel
positions
1
In the »Channel Editor« menu, select the
channel(s) you want to move with »
«,
V
<
>
»
«, »
« or »
«, and highlight the televi-
Λ
sion channel by pressing »OK«.
– Channel is marked with » «.
2
Press »
« (yellow).
– »Tools« menu is displayed.
3
Select the line »Move« with »
« or »
«
V
Λ
and press »OK« to confirm.
Notes:
In case of changing the order of the chan-
7
nels, channel numbers sent by the broad-
caster will be changed.
If more than one channel is selected for mov-
7
ing, channels will be moved one after the
other according to the selection order of
channels.
4
Select the new place of the channel with
»
«, »
«, »
<
« or »
>
« and press »OK« to
V
Λ
confirm.
5
To exit the »Channel Editor« menu, press
»EXIT«.
Displaying channels in the Channel
Editor by antenna type
If you have more than one antenna type, you
can display channels in the Channel Editor by
antenna type.
1
To display the channels in the »Channel
Editor« menu by antenna type, press » «
(green).
2
Select »Air«, »Cable« or »Satellite« with »
<
«
>
or »
« and press »OK«.
– Television will switch to the antenna sys-
tem you have selected and channels will
be displayed.
3
To exit the »Channel Editor« menu, press
»EXIT«.
ENGLISH
19
NETWORK SETUP
-------------------------------------------------------------------------------------------
Wired network settings
There are two ways of making the wired network
settings.
A
Automatic connection,
All data regarding connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
are obtained from modem automatically.
B
Manual connection,
all data regarding connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
must be configured manually.
Automatic connection
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP. Modems and IP
sharers that support DHCP obtain the »IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«
values required for internet access automatically,
and thus you are not required to enter those val-
ues manually.
1
Open the menu with »MENU«.
2
Activate the menu item »Settings« with
»OK«.
3
Select the menu item »Network Configura-
tion« with »
>
« or »
<
« and press »OK« to
confirm.
– »Network configuration« menu is dis-
played.
Timer Applications
Network Configuration
TV Settings
Change Connection T p
Wired
OK
Network Configuration
Auto
Advan
Connect
Test Connection
Ch n e Area
Back
Exi
4
Select the line »Change Connection Type«
»
« or »
« and press »OK« to confirm.
V
Λ
5
Select the option »Wired« with »
<
« or »
>
«
and press »OK« to confirm.
32
ENGLISH
6
Select the line »Network Configuration«
with »
« or »
« and use »
<
« or »
>
« to
V
Λ
select »AUTO«.
7
With » « (red) select »Connect« to establish
modem connection.
– »Connecting ... Please wait« message
will be displayed, and if the connection
is established »Connection To Gateway:
Success« message will be displayed.
8
Press » « (green) to check the performed
settings and also if the local network and
internet connection has been established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
message will be displayed.
9
Press »EXIT« to end the settings.
Note:
If you do not have a dynamic network, fol-
7
low the instructions in manual connection
section.
Werbung
Inhaltsverzeichnis
