mit EcoSmart® ohne EcoSmart® Technische Daten Bedienung (siehe Seite 11) Armatur serienmäßig mit EcoSmart® (Durchfluss- begrenzer) Betriebsdruck: max. 1 MPa Serviceteile (siehe Seite 8) Empfohlener Betriebsdruck: 0,1 – 0,5 MPa Prüfdruck: 1,6 MPa (1 MPa = 10 bar = 147 PSI) Sonderzubehör Heißwassertemperatur: max. 80°C Empfohlene Heißwassertemperatur: 65°C Montageschlüssel 58085000 (nicht im Lieferumfang enthalten) Hansgrohe Armaturen können in Verbindung mit hydraulisch und thermisch gesteuerten Durchlauferhitzern eingesetzt werden, wenn der Fließdruck mindestens 0,15 Installationskitt (nicht im Lieferumfang MPa beträgt. enthalten) Montage siehe Seite 4...
(see page 6) Technical Data with EcoSmart® without EcoSmart® This mixer series-produced with EcoSmart® (flow limiter) Operation (see page 11) Operating pressure: max. 1 MPa Recommended operating pressure: 0,1 – 0,5 MPa Test pressure: 1,6 MPa Spare parts (see page 8) (1 MPa = 10 bar = 147 PSI) Hot water temperature: max. 80°C Recommended hot water temp.: 65°C Special accessories Hansgrohe mixers can be used together with special tool 58085000 (order as an extra) hydraulically and thermically controlled continuous flow heaters if the flow pressure is at least 0,15 MPa. Installation putty (order as an extra) Assembly see page 4...