Tracer Spider RGB Bedienungsanleitung Seite 14

Microphone
EN
Tracer Spider
Tips
1. Plug and play, no need to drive
2. If the computer cannot recognize the microphone device, please try to install the
driver software: „driver booster'' or Rdriver talent"
3. When the LED light is on, it is the working state of the microphone, and when the
LED light is off, it is the microphone mute state.
4. To prevent howling, the factory default setting is: the maximum volume of the
microphone knob corresponds to 75% of the computer system volume. If you need
to increase the volume, you can adjust it in the system settings.
The path: right-click the volume icon --+ recording device--+ select the
microphone, then open the properties--+ level, adjust the volume.
14
Instructions for use