TEMPTU AIRPOD PRO Bedienungsanleitung

5.25in
Page 4
Page 1
Airpod Pro Cleaning Brush
8in
INSTRUCTIONS:
1. Prime the needle by dropping 1-2 drops of S/B Cleaner into the inner well and
pull gently on the clear loop once.
2. Remove tamper seal. Attach the top-feed Airpod Pro to the TEMPTU Air or the
TEMPTU Airpod gun.
3. Spray cleaner through.
4. Drop makeup into the inner well until needle is fully covered, blend with a Airpod
Pro brush if mixing colors.
5. Snap cap onto well for spill-free application.
Pro Tip: Recommended for use on TEMPTU Air speed setting 3
HOW TO CLEAN:
Clean using S/B cleaner, 99% Alcohol or other appropriate cleaners depending on
type of makeup formula used. Always clean between colors and at the end of use.
1. Drop desired cleaner into the inner well of the Airpod Pro.
2. Use Airpod Pro Brush to clean around and under the needle.
3. Spray completely through into Airpod Pro Cleaning pot until clear.
Pro Tip #1: For a deep clean use 99% Alcohol.
Pro Tip #2: Never soak the Airpod Pro in alcohol and never store
makeup in the Airpod Pro.
©2016 TEMPTU INC., Dist. New York, NY 10011, BIORIUS, BE - 7170 Manage