Vastking Electronic Fit M3 Smart Watch Bedienungsanleitung Seite 21

Q: Why can't I re-pair the watch with the Da Fit app on my
smartphone?
A:
1. Swipe the screen of the watch to enter settings mode.
Tap "System" and choose "Reset". The information on the
watch will be reset and the watch will be restarted.
2. Select the watch language on the watch and enter the
QR code interface as instructed.
If you still fail to connect the watch to the app, please
kindly take the following steps:
1.Make sure your smartphone's Bluetooth is enabled and
make sure the watch is not connected to other
smartphones.
2.Make sure the distance between your smartphone and
the watch does not exceed 1.6 feet distance.
Occasional failure to connect with Bluetooth Reboot your
smartphone or restart your smartphone's Bluetooth.
Q: Why can't I receive SMS / calls notifications?
A: Calls / SMS notification function works when the watch
connects to your smartphone via the app.
1.Go to your smartphone Settings, Find the Da Fit app,
enable the Location and all Notifications.
2.Enable your phone's Bluetooth and go to the Da Fit app
to pair the watch.
3.Make sure the "Do not disturb" function is not enabled
in the app or the watch.
Q: Why is the watch disconnected from the Da Fit app on
my smartphone?
A: The watch will disconnect from your smartphone in the
following cases:
1.Smartphone Bluetooth is off or exceeds the Bluetooth
connection range (the maximum Bluetooth connection
range is 32 feet and can easily be reduced by walls,
furniture, etc.)
2.The Da Fit app is closed on the phone. (This can occur
automatically under certain circumstances.)
To reconnect the watch to your smartphone, please kindly
take the following steps:
-17-